Rechercher

1 Scope 1.1 Inclusions of the Standard 1.1.1 Purpose of this Standard The purpose of this Standard is to provide compliance criteria and guidance on the design of flood- resilient new residential communities as it relates to greenfield development only. 1.1.2 Building types This Standard is applicable to the following building types: a) detached homes; b) semi-detached homes; c) row…

1 Scope 1.1 This Standard provides requirements for the performance, testing, and marking of hand-held barbecue grill brushes and replacement heads with metal bristles for consumer use, intended to clean cooking surfaces of barbecue grills. 1.2 This Standard does not cover the effectiveness of barbecue grill brushes to clean cooking surfaces of barbecue grills. 1.3 This Standard does not…

1 Scope 1.1 This Standard describes methods for the preparation of low-basis weight handsheets of cellulose filaments (CF) and CF-reinforced pulp handsheets to be used for physical tests. 1.2 This Standard also covers the preparation of low-basis weight handsheets of cellulose microfibrils (CMF) and cellulose nanofibrils (CNF), and CMF- or CNF-reinforced pulp handsheets, provided that…

1 Scope This part of the ISO/IEC 19794 standard specifies a data record interchange format for storing, recording, and transmitting the information from one or more finger or palm image areas within an ISO/IEC 19785-1 CBEFF data structure. This can be used for the exchange and comparison of finger image data. It defines the content, format, and units of measurement for the exchange of finger…

1 Scope 1.1 This Standard establishes steady-state voltage operating ranges at point of connection for AC power systems in Canada. It serves to provide guidance a) to national committees on utilization and control equipment for establishing standard ratings of such equipment on a basis coordinated with power system voltages; b) to power system designers so that new systems will be designed…

1 Scope This National Standard of Canada (NSC) addresses requirements for radon control in the design and construction of new, low-rise residential buildings (see Definitions). This Standard provides design criteria, design tools, methods and techniques, and sample construction specifications to minimize radon entry into new homes prior to initial occupancy and prepare for future mitigation…

1 Scope 1.1 This Standard provides requirements for the planning, design, construction, commissioning, operation, and maintenance of HVAC systems in HCFs. In general, these requirements are more stringent than those applied to non-health care facilities. Note: See Annex A for general guidelines on HVAC system design. Table 1 provides specific design parameters for HVAC systems. 1.2 This…

1.1 This document specifies a method for determining the Izod impact strength of plastics under defined conditions. A number of different types of specimen and test configurations are defined. Different test parameters are specified according to the type of material, the type of test specimen and the type of notch. 1.2 The method is used to investigate the behaviour of specified types of…

This document specifies an atomic absorption spectrometric method for the determination of the lead content of rubbers. The method is applicable to raw rubber and rubber products. There is no limit to the concentration of lead that can be determined. High or low concentrations can be determined, provided that suitable adjustments are made to the mass of the test portion and/or the concentration…

This document specifies an atomic absorption spectrometric method for the determination of the zinc content of rubbers. The method is applicable to raw rubber and rubber products having zinc contents at a minimum of 0,05 % (mass fraction). Zinc contents below this limit can be determined, provided that suitable adjustments are made to the mass of the test portion and/or to the concentrations of…