Rechercher

This document specifies methods, tolerances and acceptance criteria for verifying the performance of combined ultrasonic test equipment (i.e. instrument, probes and cables connected) by the use of appropriate standard calibration blocks. These methods are specifically intended for manual test equipment, i.e. ultrasonic instruments according to ISO 22232-1, and for manual ultrasonic non-…

IEC 62788-1-4:2016+A1:2020 provides a method for measurement of the optical transmittance of encapsulation materials used in photovoltaic (PV) modules. The standardized measurements in this procedure quantify the expected transmittance of the encapsulation to the PV cell. Subsequent calculation of solar-weighted transmittance allows for comparison between different materials. The results for…

IEC 62484:2020 defines the performance requirements of installed monitors used for the detection and identification of gamma emitters and the detection of neutron radiation emitters. These monitors are commonly known as spectrometric radiation portal monitors or SRPMs. They are used to monitor vehicles, cargo containers, people, or packages and are typically used at national and international…

IEC 62484:2020 defines the performance requirements of installed monitors used for the detection and identification of gamma emitters and the detection of neutron radiation emitters. These monitors are commonly known as spectrometric radiation portal monitors or SRPMs. They are used to monitor vehicles, cargo containers, people, or packages and are typically used at national and international…

This document is applicable for bonded abrasive products in general. NOTE 1 Bonded abrasive products are e.g. grinding wheels, segments, sticks and stones. This document specifies: a) ISO type number and shape; b) dimensional symbols; c) standard profiles; d) specification; e) designation; f) marking requirements. NOTE 2 This document is…

This document specifies a method for determining the ability of metallic materials to undergo plastic deformation in bending. This document applies to test pieces taken from metallic products, as specified in the relevant product standard. It is not applicable to certain materials or products, for example tubes in full section or welded joints, for which other standards exist.

This document specifies a method for the sampling of non-metallic blast-cleaning abrasives from consignments and for the subdivision of the sample into quantities suitable for undertaking the appropriate test methods specified in ISO 11127-2, ISO 11127-3, ISO 11127-4, ISO 11127-5, ISO 11127-6 and ISO 11127-7. This document is a part of the ISO 11127 series dealing with the sampling and testing of…

This document specifies a method for the determination of the particle size distribution of non-metallic blast-cleaning abrasives by sieving. This document is a part of the ISO 11127 series dealing with the sampling and testing of non-metallic abrasives for blast-cleaning. The types of non-metallic abrasive and requirements for each are contained in the ISO 11126 series. The ISO 11126 and ISO…

This document specifies a method for the determination of the apparent density of non-metallic blast-cleaning abrasives. This document is a part of the ISO 11127 series dealing with the sampling and testing of non-metallic abrasives for blast-cleaning. The types of non-metallic abrasive and requirements for each are contained in the ISO 11126 series. The ISO 11126 and ISO 11127 series have been…

This document specifies a method of assessing of whether a non-metallic blast-cleaning abrasive has a minimum hardness of 6 on Mohs' scale. This document is a part of the ISO 11127 series dealing with the sampling and testing of non-metallic abrasives for blast-cleaning. The types of non-metallic abrasive and requirements on each are contained in the ISO 11126 series. The ISO 11126 and ISO…