Laser display devices - Part 5-3: Measuring methods of image quality for laser projection displays
IEC 62906-5-3:2021(E) specifies the standard measurement conditions and measuring methods for determining the parameters of image quality for full-frame laser projection displays integrating the projection devices and screens. The front and rear projection screens are included in this document. Other display devices, such as raster-scanned (flying spot) projection devices, are not included.
Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic resoluti...
IEC 62372:2021 is applicable to housed scintillators for registration and spectrometry of alpha-, beta-, gamma-, X-ray and neutron radiation. This document specifies the requirements for the testing equipment and test methods of the basic parameters, of housed scintillators, such as:
- the direct method is applicable to measure the light output of housed scintillators based on scintillation…
Instrument transformers - Part 13: Stand-alone merging unit (SAMU)
IEC 61869-13:2021 is a product standard and covers only additional requirements for stand-alone merging units (SAMUs) used for AC applications having rated frequencies from 15 Hz to 100 Hz. The digital output format specification is not covered by this document; it is standardized in IEC 61869-9 as an application of IEC 61850, which specifies the power utility communication architecture.
This…
Cooperative intelligent transport systems (C-ITS) — Guidelines on the usage of standards — Part 2: H...
This document serves as a guideline explaining the concept of hybrid communications and support functionalities for Cooperative ITS services deployed in conformance with the ITS station architecture and related Cooperative ITS standards.
1 Scope
1.1
This Standard applies to newly-produced torches for use with propane, butane, natural gas, and MPS
(methyl acetylene-propadiene stabilized). This Standard applies to torches that aspirate atmospheric air
for combustion.
1.2
This Standard applies to hand-held torches intended for industrial applications such as brazing,
soldering, pre-heating for welding, heat treatment, and…
Lever operated non-lubricated plug type gas shut-off valves
1 Scope
1.1
This Standard applies to manual lever operated, gas shut-off valves sizes NPS 1/4 to 8 of metallic
construction with weld and flanged and threaded ends other than pressure lubricated designs for use
with natural gas, manufactured gas, and liquefied petroleum gases.
Notes:
1) Valves covered by this Standard may be used on “digester gas” (methane produced during sewage treatment…
Standard test method for wind resistance of vegetated roof assembly
1 Scope
1.1 General
The test method in this Standard determines the wind resistance of vegetated roof assembly when subjected to dynamic wind flow and dynamic wind uplift in laboratory conditions.
1.2 Applicability
Testing in accordance with the test method in this Standard is applicable to modular and built-in-place vegetated roof systems.
1.3 Exceptions
Testing in accordance with the test…
Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — ...
Scope
This section of IEC 60947-5 provides detailed specifications relating to the electrical and
mechanical construction of emergency stop devices with mechanical latching function and to
their testing.
This standard is applicable to electrical control circuit devices and switching elements which
are used to initiate an emergency stop signal. Such devices may be either provided
with…
Moderating the effects of permafrost degradation on existing building foundations
1 Scope
1.1 Mitigation strategies and other actions
This Standard covers the following strategies to maintain permafrost or mitigate permafrost degradation related to existing buildings or structures:
a)
site techniques that consist of
i)
site grading and drainage;
ii)
snow management; and
iii)
shading or albedo change.
b)
foundation techniques that consist of
i)
ventilation;
ii)…
Security management for petroleum and natural gas industry systems
1 Scope
1.1 General
This Standard specifies criteria for establishing a security management program for petroleum and
natural gas industry systems to ensure security threats and associated risks are identified and managed.
This Standard provides mitigation and response processes and procedures to prevent and minimize the
impact of security incidents that could adversely affect people, the…