Electronic displays - Part 2-2: Measurements of optical characteristics - Ambient performance
IEC 62977-2-2:2020(E) specifies standard measurement conditions and measuring methods for determining the optical characteristics of electronic displays under indoor and outdoor illumination conditions. Standard illumination geometries are specified and the reflection properties of flat screens are determined under those conditions. Reference illumination levels and spectra are used to estimate…
Semiconductor devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation
IEC 60747-17:2020 specifies the terminology, essential ratings, characteristics, safety test and the measuring methods of magnetic coupler and capacitive coupler.
It specifies the principles and requirements of insulation and isolation characteristics for magnetic and capacitive couplers for basic insulation and reinforced insulation.
This first edition cancels and replaces IEC PAS 60747-17:…
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential...
IEC 60601-2-35:2020 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to prewarm a bed are included in the scope of this document.
If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content…
Thunderstorm warning systems - Protection against lightning
IEC 62793:2020 describes the characteristics of thunderstorm warning systems (TWSs) in order to implement lightning hazard preventive measures.
Single sensors and/or a network of sensors (e.g. lightning location system) can be used as a TWS.
This second edition cancels and replaces the first edition, published in 2016. This edition constitutes a technical revision.
This edition includes the…
Photovoltaic devices - Part 9: Classification of solar simulator characteristics
IEC 60904-9:2020 is applicable for solar simulators used in PV test and calibration laboratories and in manufacturing lines of solar cells and PV modules. This document define classifications of solar simulators for use in indoor measurements of terrestrial photovoltaic devices. Solar simulators are classified as A+, A, B or C based on criteria of spectral distribution match, irradiance non-…
Dispositifs photovoltaïques - Partie 9: Classification des caractéristiques des simulateurs solaires
l'IEC 60904-9:2020 est applicable aux simulateurs solaires utilisés dans les laboratoires d’essai et d’étalonnage des dispositifs PV et dans les chaînes de fabrication des cellules solaires et des modules PV.. Le présent document définit les classifications des simulateurs solaires à utiliser dans les mesures en intérieur des dispositifs photovoltaïques terrestres.Les simulateurs solaires…
Condition monitoring and diagnostics of wind turbines — Part 2: Monitoring the drivetrain
This document specifies the implementation of a condition monitoring system for wind turbines, with particular focus on monitoring of the drivetrain. Guidance for a practical implementation of the FMSA is provided, as well as guidance for specifying best practices and minimum recommendations regarding the condition monitoring system used for failure mode detection, diagnostics and prognostics of…
Ergonomic design of control centres — Part 10: Introduction to the control room design series of sta...
This document describes the different parts of the ISO 11064 series. The overall content of each of the parts is presented, the most likely users of that part and the relevance of each part to different stages in the control room design process.
Hydraulic machines - Francis turbine pressure fluctuation transposition
IEC/TS 62882:2020(E) which is a Technical Specification, provides pressure fluctuation transposition methods for Francis turbines and pump-turbines operating as turbines, including:
- description of pressure fluctuations, the phenomena causing them and the related problems;
- characterization of the phenomena covered by this document, including but not limited to inter-blade vortices, draft…
Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrig...
IEC 60335-2-24:2020 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 60335-2-24:2020 edition 8.0 and the previous edition IEC 60335-2-24:2010+AMD1:2012+AMD2:2017 CSV edition 7.2. Futhermore, comments from IEC TC 61 experts are provided to explain the reasons of the most relevant…
