Rechercher

1 Scope 1.1 This Standard provides requirements, recommendations, and guidance for understanding the potential risks to biomass supply chains, including the following risk categories and associated risk factors: a) supplier risk (including credit-worthiness/problematic future solvency of supplier; supplier contracts; supply inventory; conflicts of interest/vested interest with competing…

1 Scope This document gives the safety requirements and measures for stationary and displaceable hand-fed single spindle vertical moulding machines, hereinafter referred to as “machines”, designed to cut wood and materials with similar physical characteristics to wood. NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085-1:2017, 3.4 and 3.5. It deals with all…

1 Scope This document gives the safety requirements and measures for stationary calibrating and sanding machines, with an integrated feed and one or more sanding belt units positioned above and/or below the work piece level, with manual or automatic loading and/or unloading, hereinafter referred to as “machines”. It deals with all significant hazards, hazardous situations and events as listed…

1 Scope 1.1 General This Standard establishes minimum requirements for pressure relief devices intended for use on fuel containers that comply with CSA/ANSI HGV 2, CSA B51, Part 2, or SAE J2579. Pressure relief devices designed to comply with this Standard are intended to be used with hydrogen fuel complying with SAE J2719 or ISO 14687. Pressure relief devices may be of any design or…

1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the existing text with the following: This part of IEC 61010 specifies safety requirements for electrical equipment intended for sterilization, washing, and disinfection of medical materials in the medical, veterinary, pharmaceutical and laboratory fields, when…

1 Scope The ISO/IEC 10373 series defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross-referenced to one or more base standards, which can be ISO/IEC 7810 or one or more of the supplementary standards that define the information storage technologies employed in identification card applications. NOTE 1…

1 Scope The ISO/IEC 15938 series operates on and generates conformant bitstreams. This document provides a specific implementation that behaves in a conformant manner. NOTE 1 Other implementations that conform to the ISO/IEC 15938 series are possible, which do not necessarily use the algorithms or the programming techniques of the reference software. The software contained in this document is…

1 Scope The data protocol used to exchange information in an RFID system for item management is specified in ISO/IEC 15961 and in this International Standard. Both International Standards are required for a complete understanding of the data protocol in its entirety; but each focuses on one particular interface: ? ISO/IEC 15961 addresses the interface with the application system. ? This…

1 Scope The Open Virtualization Format (OVF) Specification describes an open, secure, efficient and extensible format for the packaging and distribution of software to be run in virtual systems. The OVF package enables the authoring of portable virtual systems and the transport of virtual systems between virtualization platforms. This version of the specification (2.1) is intended to allow…

1 Scope This International Standard defines test methods for performance characteristics of RFID tags for item management, and specifies the general requirements and test requirements for tags which are applicable to the selection of the devices for an application. The summary of the test reports form a unified tag datasheet. It does not apply to testing in relation to regulatory or similar…