Rechercher

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 specifies safety requirements for electrically operated commercial refrigerating appliances and ICE-MAKERS that have an incorporated motor-compressor or that are supplied in two units for assembly as a single appliance in accordance with the instructions (split system). NOTE 101 Examples of appliances that are…

1 Scope 1.1 In scope This Standard specifies performance requirements for respirators that operate in the air filtering mode for filtering particulate matter. 1.2 Out of scope This Standard does not address the following: a) respirators with filters for gas/vapour removal, which will be covered in a future edition; b) respirators that operate in the atmosphere-supplying mode, or…

1 Scope 1.1 This Standard specifies requirements for the design and performance of complete active fall-protection systems, including travel-restraint and vertical and horizontal fall-arrest systems. This Standard is intended for engineers with expertise in designing fall-protection systems. 1.2 This Standard does not specify design or performance requirements for fall-arrest equipment or…

This National Standard of Canada applies to four grades of gasoline to which no lead or phosphorus compounds have been added. They are intended for use in spark-ignition engines under a wide range of climatic conditions. This standard is not intended to apply to the mixing of oxygenated gasolines and gasolines, either at the point of retail sale or after the point of retail sale. Gasoline…

This National Standard of Canada applies to two types of oxygenated gasoline, E1-E10 (“Type A”) and E11-E15 (“Type B”), to which no lead or phosphorus compounds have been added, and in which the oxygenate consists essentially of ethanol. They are intended for use in spark-ignition engines under a wide range of climatic conditions. Each type may be supplied in one of four grades which differ in…

1 Scope 1.1 General This Standard addresses the special requirements of plumbing systems pertinent to the design, construction, operation, and maintenance of health care facilities (HCFs). This Standard specifies requirements for the following in HCFs: a) water supply systems, including cold water systems and hot water systems; b) plumbing fixtures and fittings; c) drainage systems; d)…

IEC 60086-5:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 60086-5:2021 specifies tests and requirements for primary batteries with aqueous electrolyte to ensure their safe…

1 Scope 1.1 These requirements cover single pole locking-type separable attachment plugs, cord connectors, panel inlets, and panel outlets, adapters, and accessories, rated up to a maximum of 800 amperes and up to 600 volts ac or dc and not intended for connection or disconnection under load conditions. 1.2 These devices are intended to provide power from feeders or branch circuits, or are…

1.1 This Standard covers prefabricated gravity grease interceptors made of concrete, fiber-reinforced polyester (FRP), thermoplastic, or steel and specifies requirements for design, materials, performance, testing, and markings. 1.2 The requirements of this Standard are not intended to prevent the use of alternative materials or methods of construction provided such alternatives meet the…

IEC 61753-101-03:2021 contains the minimum tests, test severities and measurement requirements which a fibre management system need to meet in order to be categorised as meeting the IEC standard, category OP – Outdoor Protected environment, as defined in IEC 61753-1. This performance standard for fibre management systems defines the requirements for standard optical performance under a set of…