Ships and marine technology — Specification for bunkering of liquefied natural gas fuelled vessels
This document specifies requirements for LNG bunkering transfer systems and equipment used to bunker LNG fuelled vessels, which are not covered by the IGC Code. This document is applicable to vessels involved in international and domestic service regardless of size, and addresses the following five elements:
a) hardware: liquid and vapour transfer systems;
b) operational procedures;
c)…
Petroleum and related products — Precision of measurement methods and results — Part 4: Use of stati...
This document specifies the process and methodology for the construction, operation, and maintenance of statistical control charts to assess if a laboratory's execution of a standard test method is in-statistical-control and how to establish and validate the 'in-statistical-control' status.
It specifies control charts that are most appropriate for ISO/TC 28 test methods where the…
Wind turbines - Part 13: Measurement of mechanical loads
IEC 61400-13:2015+A1:2021 describes the measurement of fundamental structural loads on wind turbines for the purpose of the load simulation model validation. The standard prescribes the requirements and recommendations for site selection, signal selection, data acquisition, calibration, data verification, measurement load cases, capture matrix, post-processing, uncertainty determination and…
Information technology - Computer graphics, image processing and environmental data representation -...
This document specifies:
— physical and material parameters of virtual or real objects expressed to support comprehensive haptic rendering methods, such as stiffness, friction and micro-textures;
— a flexible specification of the haptic rendering algorithm itself.
It supplements other standards that describe scene or content description and information models for virtual and mixed reality,…
Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-20...
1 Scope and object
1.1 Scope
1.1.1 Equipment included in scope
[Add the following]
This Standard applies to the above-noted equipment that is intended to be installed or used in
accordance with CSA C22.1, Canadian Electrical Code, Part I.
General requirements applicable to the above-noted equipment are provided in CSA C22.2 No. 0.
1.1.2 Equipment excluded from scope
[Replace NOTE 1 with…
1.1 Scope
ASME A17.8/CSA B44.8 applies to elevators permanently installed in a wind turbine tower to provide vertical transportation of authorized personnel and their tools and equipment only.
Such elevators are typically subjected to extreme temperatures, humidity variations, and substantial horizontal motions where, by reason of their limited use and the types of construction of the…
Manually operated gas valves for appliances, appliance connector valves and hose-end valves
1 Scope
1.1
This Standard applies to manually operated gas valves, hereinafter referred to as valves, not exceeding 4 in (102 mm) pipe size, and pilot shut-off devices, hereinafter referred to as devices constructed of entirely new unused parts and materials. Except for hose-end valves not intended for permanent connection to a hose, and appliance connector valves, these valves and devices are…
Prioritization of flood risk in existing communities
1 Scope
1.1 General
This Standard outlines voluntary guidance associated with a flood hazard and vulnerability screening framework. The purpose of the screening framework is to aid in the process of prioritizing flood risk- reduction work within existing communities. This Standard provides
a)
a guide to users;
b)
references to related publications;
c)
definitions for use in the Standard…
1 Scope
1.1 General
This Standard outlines minimum requirements and recommendations for the management of a stormwater system established by an operating authority. It provides a standardized guidance process to manage a stormwater system to meet regulatory requirements, reflect sound policy decision-making, and demonstrate a high standard of care to minimize legal, environmental, social, and…
Standard for the Servicing of Halon and Clean Agent Extinguishing Systems
1.1 These requirements apply to companies involved in the servicing of halon 1301 extinguishing
systems in accordance with the National Fire Code of Canada (NFCC), NFPA 12A, and the
manufacturer’s installation, operation, and maintenance manual; and/or companies involved in the
servicing of halocarbon and/or inert gas extinguishing systems in accordance with NFCC, NFPA 2001, and
the…