Rechercher

Scope 1.1 This standard covers devices designated as adapters and integrated adapters for conductive EV power transfer to the vehicle. The devices are not used to convert voltages (e.g. AC to DC, DC to AC). These devices are only used to convert the physical configuration of the interfaces and provide for continued communication protocols. The devices covered by this standard are detailed in…

IEC TS 60870-5-7:2025, which is a technical specification, describes messages and data formats for implementing IEC 62351-5:2023 for secure communication as an extension to IEC 60870-5-101 and IEC 60870-5-104. The purpose of this document is to permit the receiver of any IEC 60870-5-101/-104 Application Protocol Data Unit (APDU) to verify that the APDU was transmitted by an authorized user and…

This document specifies a method for determining the bulk density of solid biofuels using a standardized measuring container. This method is applicable to all pourable solid biofuels with a nominal top size of maximum 63 mm while the maximum particle length is 200 mm. For fuels with a nominal top size larger than 63 mm, a different method is described. Bulk density is not an absolute value;…

IEC 60704-2-11:2025 EXV contains both the international standard and its extended version (EXV). This extended version of the official IEC Standard is available in English only and provides the user with a comprehensive content of the Standard. IEC 60704-2-11:2025 EXV includes the content of the references made to IEC 60704-1:2021. IEC 60704-2-11:2025 applies to electrically-operated food…

The standard CAN/BNQ 2501-500 proposes a consistent and robust methodology for carrying out geotechnical site investigations in a risk management approach adapted to a changing climate. This methodology is based on a detailed assessment of the site-specific conditions and on rigorous reporting of results. It takes into account current and projected climatic conditions to ensure the resilience…

IEC 61753-084-02:2025 contains the minimum initial performance, test and measurement requirements and severities which a fibre optic pigtailed 980/1 550 nm wide wavelength division multiplexing (WWDM) device will satisfy in order to be categorized as meeting the requirements of category C (indoor controlled environment), as defined in IEC 61753-1:2018, Annex A. WWDM is defined in IEC 62074-1. The…

Scope 1.1 These requirements apply to commercial and/or outdoor wood-fired ovens. Commercial wood-fired ovens are intended for use by commercial establishments for the purpose of cooking or baking food products utilizing solid wood fuel. These ovens utilize refractory materials as the liner of the oven cavity. 1.2 For the purposes of this Standard, the ovens described in 1.1 that are…

Domaine d’application 1.1 Ces exigences s’appliquent aux fours de cuisson à bois commerciaux et/ou extérieurs. Les fours à bois commerciaux sont destinés à être utilisés par les établissements commerciaux dans le but de préparer ou de cuire des produits alimentaires en utilisant du bois massif comme combustible. Ces fours utilisent des matériaux réfractaires comme revêtement de la cavité du…

This document specifies a method for the determination of the modulus of rupture of dense and insulating shaped refractory products at ambient temperature, under conditions of a constant rate of increase of stress. Shaped refractories are those which have fixed geometry and dimensions when delivered to the user. This document is accordingly applicable to standard shape refractory bricks, but also…