1 Scope
1.1
This Standard applies to manufactured wiring systems for installation in accessible areas in dry, nonhazardous locations in accordance with the Canadian Electrical Code, Part I.
1.2
This Standard applies to manufactured wiring systems having a maximum voltage rating of 600 V, and a maximum current rating of 30 A.
1.3
In this Standard, “shall” is used to express a requirement, i.…
Powered table systems for residential and commercial use
1 Scope
1.1
This Standard covers electrical safety requirements for 120 V cord-connected single-circuit wiring systems for residential and commercial use and for use with freestanding interconnected tables, provided with communication, video, and/or power receptacles that are intended for frequent setup and breakdown.
1.2
The requirements apply to powered tables connected to 15 A or 20 A, 120…
Methods of testing petroleum and associated products Standard test method for the identification of ...
This test method is a standard procedure for the determination of paraffins, olefins, naphthenes, aromatics
and unknowns (P.O.N.A.U.) in automotive gasolines using gas chromatography and flame ionization detection
(GC/FID). Individual hydrocarbon components greater than or equal to 0.01 % by mass are determined. Group types
greater than or equal to 0.01 % by mass are determined by summing…
Non-destructive testing — Qualification and certification of NDT personnel
This document specifies requirements for the qualification and certification of personnel who perform industrial non-destructive testing (NDT) in the following methods.
a) acoustic emission testing;
b) eddy current testing;
c) leak testing (hydraulic pressure tests excluded);
d) magnetic testing;
e) penetrant testing;
f) radiographic testing;
g) strain gauge testing;
h) thermographic testing;
i)…