Rechercher

This standard lists a series of environmental, social and economical procedures and documentations for the implementation of ISO 17889 part 1 and 2 and the verification of the rating on a product. The standard intends to be a guideline for organizations which want to implement ISO 17899 part 1 or 2 on a product / line of products, and for auditors. This document includes relevant documentation…

ISO 16911-1:2013 specifies a method for periodic determination of the axial velocity and volume flow rate of gas within emissions ducts and stacks. It is applicable for use in circular or rectangular ducts with measurement locations meeting the requirements of EN 15259. Minimum and maximum duct sizes are driven by practical considerations of the measurement devices described within ISO 16911-1:…

This part of ISO 23611 provides guidance for the design of field studies with soil invertebrates (e.g. for the monitoring of the quality of a soil as a habitat for organisms). Detailed information on the sampling of the most important soil organisms is provided in the other parts of this International Standard (ISO 23611-1 to ISO 23611-5). This part of ISO 23611 is used for all terrestrial…

This document provides principles and guidance for developing normative documents that contain: specified requirements for objects of conformity assessment to fulfil; specified requirements for conformity assessment systems that can be employed when demonstrating whether an object of conformity assessment fulfils specified requirements. This document is intended for use by standards developers…

This document proposes standardized best practices that would assist stakeholders to demonstrate chemical compliance of their wrist-watches, according to worldwide products regulations and trade practices. It provides an efficient rule of application for regulators who sets up new regulations.

This technical revision includes an expansion of scope to include a new clause on quantification and verification and updated definitions as beneficial. To facilitate ISO/TC265’s desire to have this guidance publish as soon as possible, this revision will comprise the addition of a quantification and verification of geological storage of CO2 clause as well as the correction of errors or…

This document specifies the procedures for producing substrates of mortar, glass and anodized aluminium used for testing sealants. The purpose of these requirements is to ensure the reproducibility of the standardized tests conducted on sealants through the precise definition of both the composition and the method of preparation of the test substrates. The substrates defined in this document are…

This international standard specifies a chemical conditioning procedure for sludge/biosolids thus allowing results obtained in different places and laboratories, and on different times to be compared when selecting type and dosage of a conditioning product at laboratory scale.

This document establishes the terms, definitions, methodologies, and calculations that are necessary for the recovery of waste from plastic products and materials labelled as industrially compostable (hereafter referred to as compostable plastic waste) through organic recycling. The document identifies the different types of organic recycling technologies used in the recovery and subsequent…

This International Standard proposal specifies technical requirements and test method for temperature sensor in radiosonde. This International Standard is applicable to the temperature measurement traceable to SI unit in boom sensors according to variations of pressure and air speed under the simulated conditions of upper air. This proposed standard will mainly provide a) Terms and definitions…