Health informatics — Device interoperability — Part 10103: Nomenclature — Implantable device, cardia...
The base nomenclature provided in IEEE 11073 to support terminology for implantable cardiac devices is extended in this standard. Devices within the scope of this nomenclature are implantable devices such as pacemakers, defibrillators, devices for cardiac resynchronization therapy, and implantable cardiac monitors. The discrete terms necessary to convey a clinically relevant summary of the…
Plastics-coated fabrics for upholstery — Part 3: Specification for polyurethane-coated woven fabrics
Specifies requirements for polyurethane-coated fabrics for upholstered furniture, where a substantially continuous coating is applied to one side of the fabric. Two annexes for the selection of the specimen and for the determination of the resistance to print wear. Part 1 of this standard: PVC-coated knitted fabrics; part 2: PVC-coated woven fabrics.
Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrate...
ISO 877-3:2018 specifies a method for exposing plastics to concentrated solar radiation using reflecting concentrators to accelerate the weathering processes. The purpose is to assess property changes produced after specified stages of such exposures. The reflecting concentrators used in these exposures are sometimes referred to as "Fresnel reflectors" because in cross-section the array…
Information technology — Radio frequency identification for item management — Part 63: Parameters fo...
This document defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz industrial, scientific, and medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used to develop RFID application standards. This document is intended to allow for compatibility and to encourage…
Road vehicles — Environmental conditions and testing for electrical and electronic equipment for dri...
This document specifies requirements for lithium-ion traction battery packs or systems used in battery electric, hybrid electric and fuel cell electric road vehicles. This document describes the most relevant environmental stresses and specifies tests and test boundary conditions. This document establishes a classification of battery packs or systems and defines different stress levels for…
Traceability of rare earths in the supply chain from separated products to permanent magnets
The proposed standard will establish a management system for determining the origin (provenance) of materials containing rare earths and tracking them as these materials move through the supply chain between suppliers of rare earth oxides and producers of rare earth containing permanent magnets.
Carbon dioxide capture, transportation and geological storage — Carbon dioxide storage using enhance...
1.1 Applicability
This document applies to carbon dioxide (CO2) that is injected in enhanced recovery operations for oil and other hydrocarbons (CO2-EOR) for which quantification of CO2 that is safely stored long-term in association with the CO2-EOR project is sought. Recognizing that some CO2-EOR projects use non-anthropogenic CO2 in combination with anthropogenic CO2, the document also shows…
Fertilizers — Determination of ammoniacal nitrogen content — Titrimetric method after distillation
The method consists in distilling of the ammonia from an alkaline solution, absorbing in an excess of standard volumetric sulphuric acid solution and back-titrating with standard volumetric sodium hydroxide solution. It is applicable only in the absence of urea or its derivatives, of cyanamide and of organic nitrogenous compounds.
Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures
ISO 7663:2014 specifies the following:
- physical and chemical tests on raw rubbers;
- standardized materials, a standardized test formulation, and the equipment and processing methods for evaluating the vulcanization characteristics of all types of halogenated isobutene-isoprene rubber (BIIR and CIIR).
Geographic information — Data quality — Part 3: Data quality measures register
This International Standard specifies the process of establishing, maintaining and publishing a register of data quality measures in compliance with ISO 19135-1:2015. It identifies and describes the components and content structure of a register for data quality measures, and the registration and maintenance procedure. This International Standard also specifies the required machine-readable (XML…
