Rechercher

This document provides a set of mandatory and optional conformity tests applicable to all versions of the FIX session layer standard.

This document establishes a nomenclature system for thermoplastic elastomers based on the chemical composition of the polymer or polymers involved. It specifies symbols and abbreviated terms used to identify thermoplastic elastomers in industry, commerce, and government. It is not intended to conflict with, but to supplement, existing trade names and trademarks. NOTE 1   The name of the…

Le présent document spécifie les critères de conception, les exigences techniques, les méthodes d’essai, les technologies d’installation et les recommandations d'usage applicables aux tuyaux, raccords et accessoires en fonte ductile utilisés dans le domaine des réseaux d'irrigation par canalisations sous pression. NOTE      Dans le présent document, toutes les pressions sont des…

This document specifies the design factor, technical requirements, test methods, installation technologies and operation advices applicable to ductile iron pipes, fittings and accessories used in piped irrigation applications. NOTE      In this document, all pressures are relative pressures expressed in bars. This document also specifies materials, dimensions and tolerances, mechanical properties…

fireplaces and appliances intended to be vented through the throat of a masonry fireplace. These appliances are designed for burning solid fuels such as wood and coal. 1.2 This Standard covers catalytic combustors utilized with fireplace inserts. 1.3 Fireplace inserts and hearth-mounted stoves as covered by this standard are not certified for installation in factory-built fireplaces within…

1.1 La présente norme s’applique aux poêles sur socle et aux foyers encastrables préfabriqués pour les foyers en maçonnerie et les appareils dans lesquels l’évacuation d’air se fait par la gorge du foyer en maçonnerie. Ces appareils sont conçus pour brûler des combustibles solides comme du bois et du charbon. 1.2 Cette norme porte sur les chambres de combustion catalytiques utilisées avec les…

1.1 These requirements apply to Factory-Built Type A Chimneys, which do not require field fabrication. The chimneys are typically intended for use with gas and liquid fuel-fired residential appliances and building heating equipment, where the appliance or equipment flue-gas temperatures do not exceed 540 °C. 1.2 The chimneys are typically intended for use in accordance with regulatory Codes,…

1.1 These requirements apply to factory-built chimney assemblies which do not require field fabrication. 1.2 The factory-built chimney assemblies are for use with gas, liquid and solid fuel-fired residential appliances and building heating equipment, where the flue-gas temperatures normally do not exceed 650 ºC. 1.3 The factory-built chimney assemblies are intended for installation and use in…

1.1 These requirements cover the design and construction of Type L vents intended for the venting of flue gases having temperatures not exceeding 300 °C, from fuel-burning appliances certified for use with Type L vents. The vents may also be used where Type B gas vents are used. They are intended for installation in buildings to provide a passageway for conveying flue gases to the outer air…

1.1 The requirements of this Standard cover the design and construction of Type B (round or oval) and Type BW Gas Vents. 1.2 Type B Gas Vents are intended for the venting of flue gases having temperatures not exceeding 245 °C, from gas fired appliances certified with draft hoods or diverters. Type B Gas Vents are also intended for use with gas fired appliances, without draft hoods or…