Textile Test Methods Standard Laundering Procedures
Covers textile test methods on standard laundering procedures.
34.A Launder-Ometer Procedures - This is covered by Method 19.1
34.B Commercial Laundering Procedures -
Textile Test Methods Grey Scale for Evaluating Change in Color
This method describes the Grey Scale for evaluating changes in
color of textiles in color fastness tests, and its use. A precise
colorimetric specification of the Scale is given as a permanent
record against which working standards may be compared.
Textile Test Methods Grey Scale for Evaluating Staining
This method describes the Grey Scale for evaluating staining of
undyed textiles in color fastness tests, and its use. A precise
colorimetric specification of the Scale is given as a permanent
record against which working standards may be compared.
Aluminum Alloy 1350 Round Wire, All Tempers, for Electrical Purposes
1. Scope
1.1 This Standard covers the electrical and mechanical characteristics of aluminum alloy 1350 round wire in the annealed, intermediate, and hard tempers for stranding into conductors or as solid single conductors, either bare or covered with a weather-resistant or insulating material.
Procedure for Measurement of the Maximum Exterior Sound Level of Stationary
Trucks with Governed D...
1. Scope
1.1 This Standard applies to trucks designed primarily for use on the road
and defines a procedure for measuring the maximum exterior sound level
emitted by trucks with governed diesel engines. The measurement is
made with the vehicle stationary and with the transmission in neutral.
1.2 The procedure defined in this Standard is primarily intended…
Relative density 60/60 degrees F hydrometers for general purposes
The requirements for five series of glass hydrometers concern reference levels for adjustment and reading, materials, dimensions, form, scale and handling. The annexes deal with standard surface tensions, stem diameters and meniscus corrections.
1. Scope
1.1 This Standard provides minimum requirements for mineral fibre, for use primarily in the insulation of dwellings and other heated building structures, and defines the types in current use. This Standard does not apply to preformed insulation less than 40 mm in thickness.
Chaudières à gaz industrielles et commerciales d'assemblage
Ce format PDF contient la Note à l'utilisateur no 2.
1. Objet
1.1 Les présentes exigences s'appliquent aux chaudières à gaz naturel et propane d'assemblage.
1.2 Les exigences de la partie A de la présente norme s'appliquent aux chaudières d'assemblage, ignitubulaires et aquatubulaires, à vapeur et à eau chaude, dont le débit calorifique maximal établi par…
1. Scope
1.1 This Standard covers four gypsum plasters used in building
construction, namely:
Gypsum Neat Plaster (frequently referred to as hardwall);
Gypsum Mill Aggregated Plaster;
Gypsum Veneer Plaster; and
Gypsum Gauging Plaster for Finish Coat.
Industrial and Commercial Gas-Fired Package Boilers
This PDF includes GI #2.
1. Scope
1.1 These requirements apply to natural and propane gas-fired packaged boilers.
1.2 The requirements in Part (A) of this Standard apply to package boilers, fire and water tube, steam and hot water, having manufacturer's maximum input ratings in excess of 400,000 Btuh and up to and including 10,000,000 Btuh.
1.3 Part (B) of the Standard…
