Is based on Standard No.106 of the International Assotiation for Cereal Science and Technology (ICC). The method consists inpreparing of dough from a sample of flour and a buffered solution of sodium chloride, isolating of the wet gluten by washing this dough with a buffered solution of sodium chloride ( washing out by hand or mechanical washing out ), followed by removing of exess washing…
Road vehicles — Visibility — Method for establishment of eyellipses for driver's eye location
Establishes two-dimensional eyellipses representative of driver eye locations corresponding to the 90th, 95th, and 99th percentiles. The statistical representation of the driver's eye location contained in this Standard applies as a design tool to those road vehicles referred to in subclause 3.1.1 of ISO 3833. Some figures illustrate shapes and reference quantities of concern.
This Standard pertains specifically to a class of board made predominantly of
wood particles of a specified size and shape (wafers), bonded with a water and
boil proof binder to a specified level of bending strength after a 2-hour boil
test. This class of board is used extensively in exterior construction
applications requiring durability and load carrying capacity. This Standard
specifies…
Standard Test Methods for Mat-Formed Wood Particleboards and Waferboard
This standard is one of the CAN3-O188 Series of Standards on
Particleboard and Waferboard. It describes the test procedures
for determining dimensional tolerances, density and moisture
content, static bending strength, internal bond strength,
hardness, screw-holding strength, linear expansion and nail
withdrawal resistance of particleboard and waferboard.
Additionally this standard…
Methods of Testing Putty, Caulking and Sealing Compounds
Contains general physical and chemical methods of testing putty,
caulking and sealing compounds for conformance with the standards
of the Canadian Government Specifications Board.
Measuring Viscosity of Letterpress and Lithographic Inks with the Falling
Rod Viscometer
This standard applies to a method for determining the plastic viscosity and yield value of letterpress and lithographic inks by use of the Falling Rod Viscometer. Viscosity tables are provided for conversion of fall times to viscosity and yield values.
1. SCOPE
1.1 This standard applies to priming paint suitable for interior and exterior
use on steel, aboard ships under conditions of marine atmosphere and
intermittent immersion in salt water.
1.2 For additional information on intended uses, see par. 7.2.
Specifies standardized nominal cross-section areas from 0.5 mm2 to 2 000 mm2, numbers and diameters of wires and resistance values of conductors in electric cables and flexible cords.
Classifies conductors for:
1.Cables for fixed installations
-Class 1, solid conductors;
-Class 2, stranded conductors.
2.Flexible copper conductors
-Class 5,
-Class 6 (more flexible than Class 5).
Includes table…
Potentiometers - Part 5: Sectional specification: Single-turn rotary low-power wirewound and non-wir...
This publication also bears the number QC 410300 which is the specification number in the IEC Quality Assessment System for Electronic Components (IECQ).
Relates to single-turn low-power wirewound and non-wirewound potentiometers with a rated dissipation normally smaller than 10 W. Prescribes standard ratings and characteristics, selects from IEC 393-1 the appropriate methods of test and gives…
Laboratory glassware — Principles of design and construction of volumetric glassware
Reference temperatur, volumetric accuracy, methods of verification and construction are considered. The annexes deal with the limits of volumetric error in relation to capacity and to the diameter at the meniscus. The interrelation between standard deviation, limit of volumetric error, and line thickness is described.