Rechercher

1. Scope 1.1 This standard applies to three-strand, hawserlaid, polypropylene monofilament rope. 1.2 For purposes of this standard "monofilament" rope shall mean rope made from filaments in excess of 2.8 tex per filament. NOTE: Polypropylene rope should not be used in situations where it is likely to receive extended exposure to…

1. SCOPE 1.1 This standard applies to three types of double-braided ropes consisting of braided core and braided cover, for general use. For more detailed information on uses, see par. 8.2.

1. Scope 1.1 These requirements apply to underfloor raceways intended to be installed within the concrete slab, or other flooring material, in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard does not include requirements for the struct ural aspects nor for the effect on the fire resistance rating of the floor in which the system is installed. 1.3…

1. Scope 1.1 These requirements apply to cellular metal and cellular concrete floor raceways and fittings intended for installation in ordinary locations in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard does not include requirements for the structural aspects nor for the effect on the fire resistance rating of the floor in which the system is installed. 1.…

This standard applies to colored, flexible, retroreflective marking material in both sheeting and tape form, coated on the nonreflective side with an adhesive and protected by a removable liner. Fore detailed information on uses, see par. 9.2.

1. Scope 1.1 This standard applies to nailles, flat nonmetallic strapping, associated connectors and connections, intended for use in securing and reinforcing packages, bundles and containers.

1. Scope 1.1 This Standard applies to line-voltage wall thermostats, as defined in Clause 2.1, rated 300 V and less, complying with the requirements of CSA Standard C22.2 No. 24, Temperature- Indicating and -Regulating Equipment, and intended to be used for direct switching of a controlled resistive heating load. 1.2 This Standard covers definitions, performance requirements, marking…

Applicable to products having a residue of equal to or more than 0.02 % (m/m). For products obtained in modern plants this evaluation is not usually required. Indicates to the risk in handling with this product. Analysis by evaporation, at ambient temperature, of a test portion and weighing of the residue. Titration of the ammonia contained in the residue with standard volumetric sulphuric acid…

1. SCOPE 1.1 This standard applies to 3-strand cotton rope treated for water and rot resistance.

Scope 1.1 This standard applies to a filled, one-part, hot-applied rubberized asphalt, suitable for application by squeegee, trowel or by other means as recommended by the manufacturer, for use in roofing and waterproofing. 1.2 For detailed information regarding intended uses of rubberized asphalt see par. 7.2.