Rechercher

This is a product standard covering the properties of various grades and types of high pressure paper base decorative laminates.

Adopts ANSI standard X3.53-1976 and French standard NF Z 65-500 as PL/1 programming language standard for the English and French versions, respectively.

Specifies an acid washing test. Gives some indication of the degree of refining but does not give a precise measure of the amount of unsaturated compounds present as different unsaturated compounds produce different colourations with sulphuric acid. Shaking together of equal volumes of the sample and 95 % (m/m) sulphuric acid. Comparison of the colour of the acid layer with that of standard…

Specifies the characteristics of products with metric dimensions and thread diameters from 3 mm up to and including 20 mm; includes specifications with reference to International Standards; gives an example for the designation.

The Standard specifies the following characteristics of the oil. Appearance: Clear, slightly viscous liquid. Colour: Almost colourless to yellow. Odour: Characteristic, sweet, woody, persistent. Relative density at 20/20 °C: 0,968 - 0,983. Refractive index at 20 °C: 1,5030 - 1,5080. Optical rotation at 20 C: Range from - 21 to - 15 . Miscibility with 70 % (V/V) ethanol at 20 °C: 1 : 5. Ester…

Covers a method enabling quantities of chloride eceeding 1 mg in the test portion to be determined with an absolute error of 0,2 to 0,5 mg, according to the concentration of the standard volumetric solution used. The principle of determination is based on the conversion of chloride ions into weakly ionized mercury(II) chloride, using highly ionized standard volumetric mercury(II) nitrate solution…

The method consists in precipitating chloride by addition of an excess of a standard volumetric silver nitrate solution and titrating this excess with a standard volumetric potassium thiocyanate solution. If the product contains natural anthocyanin pigments, the method is applicable with specified modifications.

Covers a method, the orinciple of which consists in preparing tablets from a mixture of the test portion and a binder and measuring the intensity of the K line emitted by the sulphur. The measured intensity is then compared with the intensity of emission of standard tablets of known sulphur content. The method is applicable to products having sulphur contents between 0,01 and 2 % (m/m).

1. Scope 1.1 This Standard provides information applicable to most of the commonly used electrical and electronics diagrams. It includes detailed recommendations on preferred practices for use in the preparation of schematic diagrams, connection diagrams, interconnection diagrams, and terminal diagrams.

Scope 1.1 This standard provides recommended course guidelines for the minimum essential training of, and a procedure for the certification of three levels of personnel to perform industrial ultrasonics according to generally accepted and recognized procedures and techniques. 1.2 Such certification shall provide recognition of the qualifications and competence of the three levels of…