Paper Sizes for Single Part Continuous Business Forms
Specifies a series of sizes for single part continuous forms used
in processing paperwork documentation for handwritten and/or
machine-written applications. The standard also specifies the
diameter and location of the sprocket feed holes and margins. It
specifies a common physical format and tolerances for continuous
forms so as to ensure compatibility between such documents and
office and…
1.1 Scope
1.1.1 This standard applies to newly produced domestic gas ranges (see Part III, Definitions) constructed entirely of new, unused parts and materials
(a) for use with natural gas,
(b) for use with propane,
(c) for installation in mobile housing or recreational vehicles for use with propane only (see 1.2.22), and
(d) for installation in mobile housing or recreational…
Principal Uses and Terminology for Asphalt Materials for Road Purposes
This standard is a guide identifying in chart form the principal
uses of road asphalt materials and listing definitions of terms
used to describe road asphalt materials and their applications.
The purpose of this standard is to assist road designers and
material specifiers in the selection and specification of common
road asphalt materials for new roads and the repair of old roads.
This…
Guide for Loading Dry-Type Distribution and Power Transformers
1. Scope
1.1 This Standard covers general recommendations for loading dry-type distribution and power transformers that have in sulation systems limited to 150, 185 and 220°C maximum hottest-spot operating temperatures, manufactured in accordance with CSA Standard C9, Dry-Type Transformers.
This standard covers the construction and performance of domestic
conversion burners for use with natural gas and propane with
inputs of not more than 400 000 Btu/h (120 kW).
1. Scope
1.1 This Standard applies to single-phase and 3-phase dry-type transformers within the limits of the electrical ratings listed in Clauses 6.2 and 6.3, and intended to be used in accordance with the service conditions for dry-type transformers outlined under Appendices A and B.
Note: For information on the loading of dry-type transformers see CSA Standard C9.1, Guide for Loading…
Applies to all kinds of pulp delivered in bales or rolls, and is recommended for use when sampling for all kinds of testing purposes except for the determination of saleable mass. If the pulp is to be tested for saleable mass, in addition to other properties, the gross sample obtained according to the appropriate International Standard for sampling saleable mass may also be used for the other…
This second edition cancels and replaces the first edition (i. e. ISO 2080:1973). Includes terms widely used in the science and industry of elektrodeposition and metal- finishing. In addition to terms used in the three official ISO languages (English, French and Russian), this International Standard includes the equivalent terms in the German language.Elektrolytisches Herstellen von…
Ethanol for industrial use — Methods of test — Part 6: Test for miscibility with water
The principle of the procedure consists in addition of water to a test portion, under specified conditions, and examination for opalescence against a black background with side illumination, using a second Nessler cylinder containing water as the standard. - International Standards ISO 1388/1 to ISO 1377/12 cancel and replace ISO Recommendation R 1388-1970 of which they constitute a technical…
