Contains the manufacturing tolerances for both noble and base metal thermocouples manufactured in accordance with e.m.f. temperature relationships of Part 1 of the standard. The tolerance values are for a thermocouple manufactured from wires normally in the diameter range 0.25 mm to 3 mm, as delivered to the user and do not allow for calibration draft during use.
Multichannel amplitude analyzers: Standards for time-to-amplitude converters
Presents terms and definitions relating to the main characteristics of time-to-amplitude converters (TAC). Test methods for the major parameters are also stated. Applies to TAC used in conjunction with multichannel amplitude analyzers (MCA), in the measurement of time intervals. A common application of this technique is in time-of-flight measurement, coincidence measurements, pulse shape…
Fasteners — Hexagon products — Widths across flats
Specifies the widths to be used in the respective product standards; it sets out a logical ratio between underhead (or nut) bearing area and the tensile stress area of the screw thread.
The purpose of this national painting standard is to assist all
parties concerned, to prepare job specifications and contracts
for the painting of residential, commercial and institutional
properties to ensure proper execution of the work and
satisfactory appearance and durability of the applied paints.
Guidelines for the Development of Limit States Design
1. Scope
1.1 This Publication sets forth a recommended common basis for codes and standards for the design and evaluation of civil engineering structures, such as building and industrial structures, bridges, earth and water-retaining structures, towers, chimneys, and poles, with the objective of ensuring an adequate and consistent treatment of safety and serviceability whatever the material…