1. Scope
1.1 This Standard covers asphalt roofing in sheet form, composed of asphalt saturated roofing felt, coated at least partially on one or both faces with asphalt and surfaced with mineral matter of various particle sizes. All types are conventionally packaged in roll form.
Rubber, vulcanized — Antistatic and conductive products for hospital use — Electrical resistance lim...
These limits are generally appropriate for the products listed. If, however, an International Standard has been issued for an individual product, the method specified there shall be used. Does not apply to articles whose surfaces are composed of mixtures of insulating and conducting areas or articles with substantial surface area of insulating material. A defined system of electrodes is used for…
Furniture — Chairs and tables for educational institutions — Functional sizes
The specified dimensions are confined to those which derive from anthropometric data; compliance with them ensures that the furniture permits good seating postures. The seven sizes for seating and related tables based on a reference stature are given in tables 1 and 2, and the references to the dimensions are shown in figures 1 and 2. This standard does not include special requirements applicable…
Photography — Shutter cable release tip and socket — Dimensions
Specified are the shape, basic dimensions and technical requirements of the screw threads of the shutter cable release tip and socket. The standard has been prepared with a view to ensuring the international interchangeability of cable releases.
1. Scope
1.1 This Standard pertains to temperature-raising water baths used in
biomedical laboratories.
1.2 This Standard includes construction, performance, and disclosure
requirements for water baths.
Certification of Nondestructive Testing Personnel (Eddy Current Method)
1. Scope
1.1 This standard provides recommended course guidelines for the minimum
essential training, of, and a procedure for the certification of three
levels of personnel to perform industrial eddy current nondestructive
testing according to generally accepted and recognized procedures and
techniques.
1.2 Such certification shall provide…
Fire tests — Small chimneys — Testing at elevated temperatures
Specifies a laboratory method of test. This test is designed to test for tightness, heat insulation and mechanical strength under standard conditions and for durability against treatment such as may occur during sweeping. This test provides information on the performance under a set of prescribed temperatur and flow rate conditions, but does not provide information appropriate to specific heating…
1. Scope
1.1 General
1.1.1
This Standard establishes minimum requirements for the design, construction, installation,
operation, inspection, testing, alteration, and maintenance of permanently installed manlifts for
the vertical transportation of authorized personnel and, where applicable, their tools and
equipment.
1.1.2
This Standard does not apply to:
(a) mine hoists;
(b) hoists for…
