Sealing Compound, One Component, Elastomeric, Chemical Curing
Applies to one-component joint sealing compounds that cure to a
rubber-like solid and are suitable for sealing, caulking or
glazing applications. A sealing compound meeting the requirements
of this standard is designated by the manufacturer to be one or
more of the types, classes, grades, and uses defined in Section 3
of this standard. For application on a particular substrate the
primer,…
1. Scope
1.1 This Standard covers decorative and industrial plywood made primarily with hardwood veneer faces. It also includes decorative plywood made with certain softwood veneer faces.
1.2 This Standard provides minimum requirements in terms of construction, sizes, grades, sanding, and glue bond.
1.3 This Standard also applies to hardwood plywood wall panelling in all…
Cinematography — Spool, daylight loading type, for 35 mm motion-picture cameras (capacity 30 m - 100...
This international Standard specifies the dimensions and characteristics of the general purpose daylight loading spool with a nominal capacity of 30 m (100 ft) for use in 35 mm motion-picture cameras.
NOTE - The dimensions specified in this International Standard are in substantial agreement with corresponding dimensions for microfilm Camera spools described in ISO 1116 (sec the annex).
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testi...
Device specified is known as Goodrich flexometer, but any other apparatus giving equivalent performance may be used. Predictions regarding the durability of rubbers in finished articles are possible by means of test results for the properties mentioned. Method not recommended for rubber having a hardness greater than 85 IRHD. - Part 1 of this International Standard: basic principles, part 2:…
Chlorofluorohydrocarbons for industrial use — Analysis by gas chromatography — General principles
Establishes a standard layout for methods for the determination of volatile components and gives general information on these methods. Takes into account the general layout of methods of chemical analysis given in ISO 78/2 and the recommendations given in ISO 2718.
Rubber footwear — Lined or unlined rubber industrial boots with chemical resistance
Specifies requirements for the footwear mentioned for use in chemical industry and in industrial plants and resistant to chemicals specified in this standard (sulphuric acid, hydrochloric acid and sodium hydroxide). In the case of chemicals other than those specified, the advice of the footwear manufacturer should be sought. It is recommended that footwear used in contact with chemicals should be…
Coating, Polyurethane, Two-Package, General Purpose
1. Scope
1.1 This standard applies to a two-package polyurethane coating for
interior and exterior use on metal, wood, glass-fiber-reinforced
plastic and concrete where excellent resistance to abrasion, impact,
water and corrosion are desired and where some yellowing and chalking
are not abjectable.
1.2 For more detailed information on uses,…
Tolerances and Standard Fits for Mating Parts, Metric Sizes
1. Scope
1.1 This Standard provides definitions of terms, tables of preferred basic sizes and standard tolerances, a series of standard fits to cover most engineering requirements, and information for the design of special fits for use where standard fits are unsuitable.
1.2 It is not the intention of this Standard to specify fits and tolerances for specific applications, but to afford a…
