Method for the Measurement of Vinyl Chloride in Air
1. Scope
1.1 This Standard applies to the measurement of vinyl chloride in air, using grab samples or integrated samples, usually collected by continuous adsorption in a sorbent tube over a period of time.
1.2 This Standard employs gas chromatography for the measurement of concentrations of vinyl chloride in air between 0.01 mg·m-3 and 2600 mg·m-3 at 25°C and 101.3 kPa.
1.3 Grab…
Manual of Terms and Definitions Recommended for Use in CSA Wood Standards
Preface
This is the second edition of CSA Special Publication O414, Manual of Terms and Definitions Recommended for Use in CSA Wood Standards. It revises and supersedes the previous edition published as CSA MISC.003-1968. The Manual has been prepared primarily as a reference document for CSA committees responsible for forest products or other wood related standards and is intended to…
1. Scope
1.1 This Standard applies to mineral-insulated cables with copper, nickel-clad copper, or nickel conductors, enclosed in a copper or stainless steel sheath.
1.2 The constructions covered by this Standard are intended for use in power, instrumentation, control, and fire alarm systems in accordance with the Rules of the Canadian Electrical Code, Part I.
1.3 The…
1. Scope
1.1 This Standard applies to laboratory equipment intended to be connected to supply circuits with nominal system voltages of 750 V and less, for use indoors in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I.
1.2 This Standard applies to equipment in which protection from electrical shock due to failure of functional insulation is…
Pure Tone Air Conduction Audiometers for Hearing Conservation and for
Screening
1. Scope
1.1 This Standard specifies the requirements for air conduction pure tone audiometers used in determining the hearing threshold level of an individual in comparison with the standard reference threshold levels. These audiometers may be manual, automatic recording, or computer controlled. This Standard does not include requirements for sweep-frequency audiometers and excludes…
Water Treatment Equipment and Water Quality Requirements for Hemodialysis
Applies to:
(a) water for the preparation of dialysing fluid and concentrate
for hemodialysis;
(b) all water intended for contact with the dialysing fluid
pathway;
(c) baseline quality of the feed water and any other input water;
(d) water treatment and monitoring equipment; and
(e) water distribution system.
Users of this Standard are invited to consult the other standards
in the Z364…
Dental rotary instruments — Part 2: Steel and carbide finishing burs
Specification of dimensions of and requirements for the twelfe most commonly used forms of steel and carbide finishing burs to ensure the interchangeability of these instruments. Other characteristics of bur heaeds, for example spiralled blades or cross-cut, are not covered by this standard. Attention is drawn to the number coding system of ISO 6360 which specifies a 15 digit number for…
Deals with flanges rigidly or rotatably bolted which are used in vacuum systems. Two series of flanges are specified: a preferred one, the main dimensions of which ensure compatibility with already standardized, non-bakable flanges (see ISO 1609) and a secondary series concerning flanges in common use.
