Rechercher

1. Scope 1.1 This Standard covers the dc electrical installations not exceeding 50 V between conductors on boats. 1.2 This Standard applies to boats that are not required to be certificated by the Department of Transport. 1.3 The requirements of this Standard are based on CSA Standard C22.1, Canadian Electrical Code, Part I. Where no specific requirements are given herein those…

1. SCOPE 1.1 This standard applies to vinyl paint suitable for use as an exterior and interior finish coat in marine and industrial environments, and in sea water. 1.2 For more detailed information on uses see par. 7.2.

1. SCOPE 1.1 This standard applies to a thin-film inorganic zinc rich material intended to protect abrasive-blasted plate or structural steel, before and during construction of ships and other steel structures, for a minimum of one year. After construction is complete, inorganic zinc or conventional coatings (except oil and alkyd based) may be applied over the preservative. 1.2 For…

States the requirements for ethylene glycol base engine coolant concentrate. Caution - Manufacturers of some vehicles with aluminum engine components specify a coolant with added protection from aluminum corrosion in excess of what would be expected for a product to this standard. The vehicle Owner's Manual should be consulted for any specialized coolant requirements.

Describes a variable-length format for the representation of latitude, longitude and altitude for use in data interchange. Allows the use of normal sexagesimal notations involving degrees, minutes and seconds as well as various combinations of sexagesimal and decimal notations. Uses numeric characters 0 to 9, graphic characters plus (+), minus (-), full stop (.) and comma (,).

Deals with the arrangement of those controls which are used in positioning loads and serves as general basis for the elaboration of detailed standards for particular types. Defines basic requirements of these controls, safe operation conditions and criteria for the layout of control levers and pedals.

S'applique aux mesures jugées essentielles au bon adjustement des culottes en tricot coupées au genou ou plus courtes pour fillettes et filles (Tailles Canada Standard courantes de 2 à 16).

1. Scope 1.1 This Standard covers chlorinated poly (vinyl chloride) pipe, tubing, and fittings having a standard dimension ratio SDR 11 for use in hot and cold water pressurized distribution systems. Nominal pipe, tubing, and fitting sizes are from 3/8 through 2 in. Fittings include socket type, plastic-to-metal transition type, and mechanical type. 1.2 This Standard includes…

These Requirements cover the design and construction of "tin-clad" fire doors which have demonstrated in fire tests, fire performance properties sufficient to warrant their use in closure assemblies having a fire protection rating of up to and including 3 h, when tested in accordance with the Standard Method for Fire Tests of Door Assemblies, CAN4-S104.