Wheelchairs - Nomenclature, Terms, and Definitions
1. Scope
1.1 This Standard defines the basic elements of manual, electric, and any other types of wheelchairs and gives terms and definitions for these elements. It also illustrates the dimensions most commonly used to describe the physical characteristics of wheelchairs. Note: This Standard is not intended to cover all the terms and definitions used when referring to wheelchairs. It is…
Covers plumbing supply fittings of NPS-1 nominal size and smaller
and plumbing waste fittings NPS-1 nominal size and smaller.
Plastic traps covered by this Standard are intended for use only
in accessible locations. This Standard does not cover
conventional pipes and tubes and pipe/tube fittings
Textile Test Methods Textile Fabrics - Burning Behaviour - Determination of
Ease of Ignition of V...
This National Standard of Canada is equivalent to the
International Standard ISO 6940-1984. It specifies a method for
the measurement of ease of ignition of vertically oriented
textile fabrics intended for apparel, curtains and draperies in
the form of single- or multi-component (coated, quilted,
multilayered, sandwich construction and similar combinations)
fabrics.
Explosion-Proof Enclosures for Use in Class 1 Hazardous Locations
1. Scope
1.1 This Standard covers the details of construction and tests for explosion-proof enclosures for electrical equipment to be used in Class I, Division 1, Groups A, B, C, and D hazardous locations and in gaseous mines in accordance with the Rules of the Canadian Electrical Code, Part I and the requirements of CSA Standard CAN3-M421-M85.
1.2 Other Standards for hazardous location…
Specifies and describes a system for use in product standards; gives examples for hexagon head bolts, screws, and nuts, tapping screws, parallel pins, and washers.
Fasteners — General requirements for bolts, screws, studs and nuts
Requires that standardized products are defined by: mechanical properties (material), product grade (tolerances), surface coatings (if required), special requirements (if agreed); gives specifications and reference to International Standards.
Aéronautique et espace — Colliers à serrage central pour systèmes de fluides — Dimensions
La présente Norme internationale fixe les cotes maximales et minimales des colliers à serrage central fixés à l'aide d'une vis de diamètre nominal 5 mm. Les dimensions fixées définissent une enveloppe dimensionnelle. La présente Norme internationale ne doit pas être considérée comme une norme d'interchangeabilité. Les tolérances pour chaque type de collier sont à définir dans les…