Fruit and vegetable products — Determination of formic acid content — Part 2: Routine method
The method consists in quantitative entraining by steam of the acid present in a test portion, determing of the amount of iodine equivalent to the amount of bromine consumed by the acid in the distillate, by titration with sodium thiosulfate standard volumetric solution.
1. Scope
1.1
This Standard applies to cord-connected and permanently connected fans and
ventilators intended to be connected to supply circuits of 600 V and less, for
use in accordance with the Rules of the Canadian Electrical Code, Part 1.
1.2
This Standard applies to fans and ventilators for ventilating or exaust
purposes and filter units consisting of an air circulating fan and a…
Lead-acid starter batteries. Part 2: Dimensions of batteries and dimensions and marking of terminals
Applies to lead-acid batteries used for starting, lighting and ignition of passenger automobiles and light commercial vehicles with a nominal voltage of 12 V fastened to the vehicles by means of ledges on the long sides of the battery case, two alternative admissible means are specified in Section Three.
Specifies:
-the main dimensions of starter batteries of four standard series;
-the location…
Fisheries - Plastic Containers for the Transportation and Storage of Fishery
Products
1. OBJECt
The object of this standard is to determine the requirements regarding the
characteristics and testing methods of plastic or reinforced plastic containers
used for the transportation and storage of fishery products.
2. SCOPE OF APPLICATIOn
This standard applies to the following plastic or reinforced plastic
containers, according to their nominal capacity measured in litres…
Supplement No.2-1984 to CAN3-B45 Series-M81 Standards on Plumbing Fixtures
This Series of standards applies to common types of plumbing
fixtures such as bathtubs, sinks, W.C.'s, etc., but does not
apply to appliances such as clothes washers or W.C.'s used in
recreational vehicles. The standards include dimensional
requirements, performance requirements and tests, and marking
requirements and apply to plumbing fixtures made of vitreous
china, enamelled…
1. Scope
This Standard covers requirements for the general and specific characteristics
of vinyl asbestos and vinyl composition floor tile, including dimensions,
physical properties, packing, and marking.
1. Scope
This Standard covers requirements for the general and specific characteristics
of high vinyl floor tile, including dimensions, physical properties, packing,
and marking.
1. Scope
This Standard covers requirements for the physical properties and dimensions of
sheet vinyl of both the unfilled (clear) vinyl wearing surface (Type I), and
the filled wear layer (Type II) on an organic, inorganic, filled, foamed, or
unfoamed vinyl composition or non-asbestos formulated backing.
