Rechercher

Affiner les résultats
Code de la Classification internationale pour les normes (ICS)
Source
Code de l’organisme d’élaboration de normes (OEN)
Langue
Statut
Code de la Norme nationale du Canada (NNC)
Date de publication

De

à

Affichage 26231 - 26240 de 28587
Code for Hot Forging Producers, Health and Safety Requirements
1. Scope and Purpose 1.1 Scope This Standard covers the occupational health and safety requirements for all classes of power forging machinery, both for impression die and flat die forging, including power-driven and gravity-drop hammers; mechanical, hydraulic, and screw-fo rging presses; hot trimming presses; upsetters; forging rolls; ring-rolling; bolt-heading; and rivet-making machines…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
1987-10-31
Code(s) de l'ICS :
25.120.10
Solid-State Speed Controls
1. Scope 1.1 This Standard applies to solid-state, single-phase motor speed controls, rated at 300 V and less, 20 A and less, designed to be used in circuits for the control of shaded pole, permanent split capacitor, or universal motors, and other motors suitable for use with this type of control, intended for use in nonhazardous locations in accordance with the Canadian Electrical Code,…
Éditeur :
CSA
Statut :
Norme
Date de publication :
1987-10-31
Code(s) de l'ICS :
29.130.01
Standard for Compounds and Tapes for Threaded Pipe Joints
1. SCOPe 1.1 This Standard is for the determination of the acceptability of pipe joint compounds and tapes for piping systems intended for the containment of alcohol, gasohol, natural gas and methane, oxygen, petroleum distillates, propane and butane, steam, and water (potable and non-potable). 1.2 Unless otherwise specified, products meeting this Standard are considered suitable for the…
Éditeur :
ULC
Statut :
Annulée
Date de publication :
1987-10-31
Code(s) de l'ICS :
23.040.60
Standard Method of Test for Ignition Resistance of Loose Fill Insulation (Cigarette Method)
1. SCOPE 1.1 This Standard applies to cellulose fibre loose fill thermal insulation suitable for indoor use in building construction within the temperature range of -50 to 80°C. 1.2 Insulation material conforming to this Standard is suitable for pouring by hand or for blowing through specially designed equipment. When so specified by the manufacturer, a particular product may be…
Éditeur :
ULC
Statut :
Annulée
Date de publication :
1987-10-31
Code(s) de l'ICS :
91.120.10; 19.020
Photography — Overhead projectors — Part 2: Transparencies and transparency frames — Dimensions
This part of the standard specifies the film type for transparencies and the dimensions of mounted and unmounted transparencies, including transparency frames, in order to ensure compatibility between the projectors and transparencies within each type of projector system described.
Éditeur :
ISO
Statut :
Annulée
Date de publication :
1987-10-28
Code(s) de l'ICS :
37.040.10
Photography — Overhead projectors — Part 3: Film rolls, cores and winders — Dimensions
In addition to the film roll core dimensions and film roll diameters, this part of the standard specifies the dimensions of the keys on winders for film rolls fitted to the projetor scroll units or attachments. It does not require that scroll units for one projector type accept film rolls intended for another type.
Éditeur :
ISO
Statut :
Annulée
Date de publication :
1987-10-28
Code(s) de l'ICS :
37.040.10
Rubber — Identification of polymers (single polymers and blends) — Pyrolytic gas chromatographic met...
Describes three methods for the different materials. The methods may also be applicable to other types of polymers than given in the standard, but this must be verified by the analyst in each particular case.
Éditeur :
ISO
Statut :
Annulée
Date de publication :
1987-10-21
Code(s) de l'ICS :
83.060
Transfusion equipment for medical use — Part 1: Glass transfusion bottles, closures and caps
Specification of dimensions and requirements for types of transfusions bottles for medical use in order to ensure functional interchangeability of the equipment. The specifications relate also to the quality and performance of materials used in transfusion equipment. A second aim of this standard is the unified presentation of terms and designations for such equipment. This second edition of the…
Éditeur :
ISO
Statut :
Annulée
Date de publication :
1987-10-14
Code(s) de l'ICS :
11.040.20
Oil of bergamot petitgrain (Citrus aurantium (Linnaeus) ssp. bergamia (Wight et Arnott) Engler)
The Standard specifies the following characteristics of the oil. Appearance: Clear liquid. Colour: Amber. Odour: Characteristic. Relative density at 20/20 °C: 0,886 - 0,894. Refractive index at 20 °C: 1,4600 - 1,4650. Optical rotation at 20 °C: Between - 4 and + 3 . Miscibility with 70 % (V/V) ethanol at 20 °C: 1 : 3. Acid value: Maximum 2,0. Ester value: 115 - 195. Ester value after acetylation…
Éditeur :
ISO
Statut :
Annulée
Date de publication :
1987-10-14
Code(s) de l'ICS :
71.100.60
Functional and Compatibility Requirements for Digital PBX's, and Analogue PBX's with Dig...
Provides additional functional and compatibility criteria for any type of PBX with DS-1 digital interfaces. This Standard also provides functional and compatibility criteria for digital PBX's with only analogue interfaces. It also provides requirements for connections made through a digital switching matrix or involving a DS-1 digital interface that differ from those in CSA Standard…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
1987-09-30
Code(s) de l'ICS :
33.040.30

Spacer