Standard for Flexible Underground Hose Connectors for Flammable and
Combustible Liquids
Sets forth requirements for flexible underground hose connectors
intended for flammable and combustible liquid service at
temperatures within the range of -40 degrees C to +50 degrees C.
Standard for Leakage Rated Dampers for Use in Smoke Control Systems
These requirements cover leakage rated dampers intended for use
in heating, ventilating and air conditioning (HVAC) systems.
Leakage rated dampers are intended to restrict the spread of
smoke in HVAC systems that are designed to be automatically shut
down in the event of a fire or to control the movement of smoke
within a building when the HVAC system is operational in
engineered smoke…
1. Scope
1.1 This Standard applies to room air conditioners as defined in Clause 2.
1.2 This Standard covers equipment powered by a single-phase electric current
and rated at 10.55 kW (36 000 Btu/h) cooling capacity and below at standard
rating conditions.
1.3 This Standard does not apply to fan-coil air conditioning units, unit
ventilators, packaged terminal air conditioners, or water-…
Standard for Alarm Initiating and Supervisory Devices for Water Type Extinguishing Systems
Contains requirements for Alarm Initiating and Supervisory
Detection Devices for attachment to water type extinguishing
systems as follows:
A) Alarm Initiating Devices, including but not limited to:
(i) Vane and paddle type waterflow switches; and
(ii) Pressure actuated waterflow switches;
B) Supervisory Indicating Devices, including but not limited to:
(i)…
Information Processing Systems - Open Systems Interconnection - Estelle: a
Formal Description Tech...
This National Standard of Canada is equivalent to International
Standard ISO 9074-1989. It defines the semantics and syntax of
the Formal Description Technique Estelle. Estelle is in general
used for the formal description of distributed, concurrent
information processing systems. In particular Estelle can be
used formally to describe the service definitions and protocol
specifications…
Textile Test Methods Textiles - Tests for Colourfastness - Part A02: Grey
Scale for Assessing Cha...
This National Standard of Canada is equivalent to International
Standard ISO 105-A02:1987. It describes the grey scale for
determining changes in colour of textiles in colour fastness
tests, and its use. A precise colorimetric specification of the
scale is given as a permanent record against which newly prepared
working standards and standards that may have changed can be
compared.
Textile Test Methods Textiles - Tests for Colourfastness - Part B01:
Colourfastness to Light: Day...
This National Standard of Canada is equivalent to International Standard ISo
105-B01:1988.
1.1 This part of ISO 105 specifies a method intended for determining the
resistance of the colour of textiles of all kinds and in all forms to the
action of daylight.
1.2 If there is a possiblity of the sample being photochromic, then the test
for photochromism shall be applied additionally (see…
Textile Test Methods Textiles - Tests for Colourfastness - Part B02:
Colourfastness to Artificial ...
This National Standard of Canada is equivalent to International Standard ISO
105-B02:1988.
1.1 This part of ISO 105 specifies a method intended for determining tCh[Ce
resistance of the colour of textiles of all kinds and in all forms to the
action of an artificial light source representative of natural daylight (D65).
The method is also applicable to white (bleached or optically…
Textile Test Methods Textiles - Tests for Colourfastness - Part A03: Grey
Scale for Assessing Sta...
This National Standard of Canada is equivalent to International
Standard ISO 105-A03:1987. It describes the grey scale for
determining staining of adjacent fabrics in colour fastness
tests, and its use. A precise colorimetric specification of the
scale is given as a permanent record against which newly prepared
working standards and standards that may have changed can be
compared.