Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 7: Genera...
This guide is applicable to instrumentation intended for measuring voltage or current components with frequencies in the range of d.c. to 2 500 Hz which are superimposed on the voltage or current at the power supply frequency. This guide is also applicable to measurement instrumentation intended for testing individual items of equipment in accordance with emission limits given in standards as…
Thermal insulation — Determination of steady-state thermal resistance and related properties — Guard...
Defines the use of the guarded hot plate method to measure the steady-state heat transfer through flat slab specimens and the calculation of its heat transfer properties. Annex A forms an integral part of this standard. Annexes B, C and D are for information only.
Workplace air — Determination of vaporous aromatic hydrocarbons — Charcoal tube/solvent desorption/g...
Specifies a method for the measurement of the concentrations of airborne vapours in the range from approx. 1 mg/m^3 to 1 000 mg/m^3 when sampling 10 litres of air. Annexes A, B and C form an integral part of this standard. Annex D is for information only.
Workplace air — Determination of vaporous chlorinated hydrocarbons — Charcoal tube/solvent desorptio...
Specifies a method for the measurement of the concentrations of airborne vapours in the range from approx. 1 mg/m^3 to 1 000 mg/m^3 when sampling 10 litres of air. Annexes A, B and C form an integral part of this standard. Annex D is for information only.
Aerospace — Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components
The requirements for the symbols are specified in SAE AS 1290A which is adopted as a de facto ISO International Standard. For the purposes of international standardization, the amendments listed in table 1 shall apply to the specific clauses of AS 1290A noted under "Reference".
Cranes — Information to be provided — Part 5: Overhead travelling cranes and portal bridge cranes
Specifies information to be provided by: a purchaser in enquiring about or ordering a crane, a manufacturer in tendering for or supplying a crane. Annex A forms an integral part of this standard.
Thermal insulation — Determination of steady-state thermal resistance and related properties — Heat ...
Defines the use of the heat flow meter method to measure the steady-state heat transfer through flat slab specimens and the calculation of its heat transfer properties. Annex A forms an integral part of this standard. Annexes B, C, D and E are for information only.
