Applies to palletizing of boxes and paper bags containing food for export as
aid. It specifies required materials for pallets, wrapping and strapping as
well as construction and dimensions of pallets. This standard is mainly
intended to be used in food aid contracts by the Canadian International
Development Agency (CIDA).
Information Processing Systems - Data Communications - Use of the X.25 Packet Level Protocol in Loc...
This National Standard of Canada is equivalent to International Standard ISO/IEC 8881-1989.
1 Scope
This International Standard deals with the use of the X.25 Packet Level Protocol (PLP) as specified in ISO 8208 operating over ISO 8802 Local Area Networks (LANs). Section 2 of this International Standard specifies the operation of the X.25/PLP using the Logical Link Control (LLC) Type 2…
This Standard describes requirements and test methods for materials,
dimensions, workmanship, pipe stiffness, quality control, joining systems, and
marking for SDR 28, 35, and 41 Type PSM PVC sewer pipe and fittings.
Note: Industrial waste disposal lines should be installed only with specific
approval of the regulatory authority, since chemicals not commonly found in
drains and sewers and…
1.1 Applies to chemically treated wood-based cellulose fibre loose fill
thermal insulation suitable for indoor use in building construction within the
temperature range of -50 to 80 degrees C.
1.2 Insulation material to this standard is suitable for blowing through
specially designed equipment for horizontal (up to a slope of 2.5 in 12) and
vertical applications and for pouring by hand…
Applies to surgical operating gowns with set-in or raglan
sleeves. It provides standard garment measurements and size
designations. Body measurements are included as a guide to a
suitable choice of garment size. Residual garment shrinkage of
a maximum of 2% has been recognized in garment measurements.
Surface acoustic wave (SAW) resonators - Part 1: General information, standard values and test condi...
Relates to surface acoustic wave (SAW) resonators for oscillator use. Provides general information and methods concerning measurements and tests common to many types of SAW resonators. Establishes uniform conditions for assessing the mechanical, electrical and climatic properties of SAW resonators, describes test methods, gives recommendations for standard values and gives guidance on SAW…
The purpose of this standard is to describe the manufacturing characteristics
of eyeglass lenses. It applies to uncut lenses as well as to cut and mounted
lenses. This document does not deal with the quality of the mountings or the
safety of the eyeglasses.
Establishes a specification of four types of aminoplastic moulding materials classified according to the intended application: Type UF A - general purpose Type MF B - Hot water resistant Type MF C - Thermal resistant and electrical Type MF D - Impact resistant These types have been further subdivided into grades based on property levels and requirements. The property requirements of 9 grades of…
Medical electrical equipment. Part 2: Particular requirements for the safety of endoscopic equipment...
This standard specifies requirements for the safety of endoscopic equipment and integrated instrumentation used for medical diagnosis and therapy. It is subdivided into five applications concerning endoscopes for (a) direct visualization, (b)
integration with thermocautery or (c) lithotrite, (d) electrosurgery and (e) other specialized endoscopes.
