1.1 This standard applies to an intumescent fire-retardant coating for
interior use on properly prepared combustible and non-combustible surfaces,
including structural steel.
1.2 For more detailed information on intended uses and application, see par.
8.2 and 8.3 respectively.
1. Scope
1.1 This standard applies to an oil based cementitious primer for use on
galvanized metal surfaces.
1.2 For more detailed information on intended uses, see par. 7.2.
1.3 The testing and evaluation of a product against this standard may
require the use of materials and/or equipment that could be hazardous.
This document does not purport to…
General Requirements, Design Criteria, the Environment, and Loads
1.1 General
1.1.1
This Standard sets forth requirements and guidance on design principles, safety
levels, and loads to be used in connection with the design, construction,
transportation, installation, and decommissioning of fixed offshore structures.
1.1.2
It is intended to cover all such fixed offshore structures, or parts thereof,
including the main deck and topside structures,…
1.1 General
This Standard addresses the geotechnical engineering aspects of
(a) gravity-base structures;
(b) fill structures;
(c) fill-retention structures; and
(d) pile-supported structures.
Specific considerations include site investigations, general design principles,
the influences of soil and natural processes on the foundation components, and
the geotechnical factors that…
Intrinsically Safe and Non-incendive Equipment for Use in Hazardous Locations
1. Scope
1.1
This Standard specifies tests for the testing of non-incendive electrical
equipment and the details of construction and tests for intrinsically safe
electrical equipment for use in the following hazardous locations in accordance
with the Rules of the Canadian Electrical Code, Part I, and CSA Standard
CAN3-M421:
(a) Class I, Groups A, B, C, and D;
(b) Class II, Groups E…
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification f...
Covers dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits in dual-in-line format. Sockets include standard type and low-profile type.
Plastics pipes and fittings — Opacity — Test method
The principle consists in measuring the light flux passing through a test piece cut from a pipe or fitting as a percentage of the incident light flux on the test piece. The standard lays down the maximum acceptable limit for the light which may pass through the wall of the pipe or fitting, if the product standard specifies that they shall be opaque.