This National Standard of Canada is equivalent to American National Standards
Institute (ANSI) standard T1.403-1989.
This standard describes the metallic interface between a carrier and customer
installation (CI), referred to as the network interface (NI), at the DS1 rate.
It establishes requirements at the NI necessary for compatible operation
between the carrier and the CI. Interfaces…
Canadian Alphanumeric Ordering Standard for Character Sets of CSA Standard
CAN/CSA-Z243.4
1.1
This Standard defines the alphanumeric lexical sequence for the English and
French languages. It is intended for general-purpose sorting of all
alphanumeric strings using the character repertoire of CSA Standard
CAN/CSA-Z243.4 in Canada, wherever human intervention is involved or sorted
results are presented to users.
1.2
Sorting is based on the rules of word ordering rather than on…
Standard Method of Test for Determination of Degrees of Combustibility
Using an Oxygen Consumption...
1.1 This test method determines the degree of combustibility of building
materials by measuring the rate of heat release from specimens exposed to
radiant heat using the test apparatus, specimen configurations, and procedures
described.
1.2 This test method provides for radiant thermal exposure of a specimen
together with application of a pilot flame on the specimen.
1.3 Heat release…
Standard Practice for Exposing Plastics to a Simulated Soil Environment
This National Standard of Canada is based on draft ASTM Standard D3826.
1. Scope
1.1
This Standard outlines a method for determining the effect of exposure to a
simulated soil on the properties of plastics in the form of moulded and/or
fabricated articles, tubes, rods, sheets, and film. Changes in visual,
chemical, and mechanical properties may be determined by the applicable method
(…
Information Processing Systems - Open Systems Interconnection - File Transfer, Access and Managemen...
This National Standard of Canada is equivalent to International Standard ISO/IEC 8571-5:1990.
1 Scope
This part of ISO 8571 defines a Protocol Implementation Conformance Statement (PICS) proforma for the detailed expr ession of the conformance requirements of ISO 8571. This PICS proforma is in compliance with the relevant requirements and in accordance with the relevant guidance for a PICS…
Braking Systems - Performance Requirements and Test Procedures - Wheeled
Machines
This National Standard of Canada is based on International Standard ISO
3450:1985.
This International Standard specifies minimum performances and test criteria
for braking systems to enable uniform assessment of the braking capability of
earth-moving machinery which operates on work sites or travels on public roads.
Service, secondary and parking braking systems and retarders are covered…
Shielded and Concentric Neutral Power Cables Rated 5-46 kV
1.1
Applies to the materials, construction, and testing of one- to four-conductor
shielded and single-conductor concentric neutral cables incorporating
cross-linked polyethylene or ethylene-propylene rubber insulation with optional
thermoplastic or thermoset jacket and optional metal sheath or armour. These
cables are intended for transmission and distribution of electrical energy for
use…
Deals with the qualification, application, inspection, testing, handling, and
storage of materials required for plant-applied fusion bond epoxy coating
applied externally to bare steel pipe. The coated pipe is primarily intended
for buried or submerged service for oil or gas pipeline systems.
Note: It is not intended that the application of this Standard should prevent
the development of…
Deals with the qualification, application, inspection, testing, handling, and
storage of materials required for plant-applied polyethylene coating applied
externally to bare pipe, whereby an adhesive is interposed between a bare or
epoxy primed pipe and the polyethylene. The coated pipe is primarily intended
for buried or submerged service for oil or gas pipeline systems.
Note: It is not…
This National Standard of Canada is equivalent to International Standard ISo
1559-1986.
This International Standard specifies requirements and methods of test for
alloys composed mainly of silver, tin and copper, complying with the
composition requirements (see 4.1) in either the powder or tablet form,
suitable for the preparation of dental amalgam.