Rechercher

1.1 These requirements cover clear or translucent glazing material intended for indoor use, outdoor use, or indoor/outdoor use as a substitute for, or in combination with plate glass show window panels. 1.2 The material is intended to resist burglarious attacks of the hit-and-run type.

The principle of the method specified is determining the total sediment after accelerated ageing according to two procedures: A - thermal ageing (at 100 °C for 24 h), B - chemical ageing (dilution with hexadecane, heating to 100 °C for 1 h), followed by hot filtration as specified in ISO 10307-1. The object is to predict fuel oil stability to sedimentation during storage and handling.

Lays down dimensions for the operator's seat and the location of specific controls relative to the seat index point within the seating accommodation on agricultural tractors with a track width greater than 1150 mm. The controls included are the steering-wheel, clutch pedal, brake pedal(s), and throttle pedal. Standardized dimensions and locations will assist the future design of operator…

Deals with the safety of commercial appliances (cooking ranges, ovens, hobs and hob elements), whose rated voltage is no more than 250 V for single phase a.c. appliances and 480 V for other appliances. The electrical part of appliances making use of other forms of energy is also within the scope of this standard.

Computer security is divided into four areas: security with regard to installation and operation; system security; security with regard to document contents; security with regard to communication. The use of this standard is intended to facilitate communication with quality assurance functions within the company and outside, consideration of the different security aspects in the design work,…

Provides guidelines for establishing new routines required for the production of design documentation. The routines apply to manual as well as computer-based design work, but are particularly important when computers are used. The following phases are characterized: development phase, approval phase, distribution phase, storage phase, revision phase, phasing out. The use of this standard…

Amends values in table 1 and subclause C.2.3 and equations in subclauses 3.2.2.1 and 3.2.3.1.

1.1 La présente norme s'applique aux mesures jugées essentielles au bon ajustement des pyjamas en étoffe tissée et en tricot et des polojamas en tricot rectiligne pour fillettes et garçonnets (tailles courantes TCS de 2 à 6X), pour filles (tailles courantes TCS de 7 à 16) et pour garçons (tailles courantes TCS de 7 à 20). 1.2 La présente norme s'applique également aux nuisettes pour…

This standard applies to tables with folding metal legs and plywood tops.