1.1
This Standard provides requirements for rating, performance, and tests of all
sizes of factory-assembled packaged terminal air-conditioners and heat pumps
(as defined in Clause 2.1) intended for use in residential, commercial, and
industrial heating and cooling systems.
1.2
This Standard applies to electrically operated, vapour-compression
refrigeration systems.
1.3
This Standard…
Standard for Tank Assemblies for Collection of Used Oil
1.1
These requirements cover the adaptation of tank assemblies contructed in
accordance with the Standards described in Clause 1.2 for the collection and
storage of used oil.
1.2
The tanks shall be of the non-pressure type and constructed in accordance with
the basic requirements of one of the following Standards:
A. ULC-S601 - Standard for Shop Fabricated Steel Abovegound Horizontal…
Standard for Shop Fabricated Steel Aboveground Vertical Tanks for Flammable and
Combustible Liquids...
1. Scope
1.1 These requirements cover single and double wall cylindrical vertical steel
non-pressure tanks that are used for the aboveground storage of flammable
liquids and combustible liquids such as gasoline, fuel oil, or similar products
with a relative density not greater than 1.0.
1.2 Section 3 of these requirements cover single wall tanks. Section 4 of
these requirements cover…
Standard for Shop Fabricated Steel Aboveground Horizontal Tanks for Flammable
and Combustible Liqui...
1. Scope
1.1 These requirements cover single and double wall cylindrical horizontal
steel non-pressure tanks that are used for the aboveground storage of flammable
liquids and combustible liquids such as gasoline, fuel oil, or similar products
with a relative density not greater than 1.0.
1.2 Section 3 of these requirements cover single wall tanks.
1.3 Section 4 of these requirements…
1.1
These requirements cover burglary-resistant safes classified as follows:
A. Tested on Six Sides:
(i) Residential Safe;
(ii) Tool Resistant Safe - Class TL-15X6;
(iii) Tool Resistant Safe - Class TL-30X6;
(iv) Torch and Tool Resistant Safe - Class TRTL-15X6;
(v) Torch and Tool Resistant Safe - Class TRTL-30X6; and
(vi) Torch and Tool Resistant Safe - Class TRTL-…
Specifies the safety requirements for single-capped fluorescent lamps for general lighting purposes of all groups having 2G7, 2GX7, GR8, G10q, GR10q, GX10q, GY10q, 2G11, G23, GX23, G24, GX32 and 2G13 caps. Also specifies the method a manufacturer should use to show compliance with the requirements of this standard.
Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods
Contains standardized procedures for the calculation of the effects of short-circuit currents in two sections as follows: - the electromagnetic effect on rigid conductors and flexible conductors; the thermal effect on bare conductors.
Only a.c. systems for rated voltages up to and including 420 kV are dealt with.
The contents of the corrigendum of March 1995 have been included in this copy.