Rechercher

Specifies dimensional requirements on thread and thread gauges, and covers the instruments and methods for the inspection of threads for line pipe, casing and tubing. Requirements are specified in API Specification STD 5B (STD 5B), thirteenth edition, May 31, 1988 which is adopted as ISO 10422. For the purposes of international standardization, modifications shall apply to specific clauses and…

Provides guidance for inspecting, installing, operating, maintaining and repairing surface safety valves and underwater safety valves. Requirements are specified in API Recommended Practice 14H (RP 14H), third edition, August 1, 1991 which is adopted as ISO 10419. For the purposes of international standardization, modifications shall apply to specific clauses and paragraphs of API RP 14H. These…

This International Standard specifies the physical and magnetic characteristics of an 8 mm wide magnetic tape cartridge to enable interchangeability of such cartridges. It also provides a format and recording method, thus allowing, together with ISO 1001 for Magnetic Tape Labelling, full data interchange by means of such magnetic tape cartridges.

This International Standard specifies the physical and magnetic characteristics of an 8 mm wide magnetic tape cartridge to enable interchangeability of such cartridges. It also provides a format and recording method, thus allowing, together with ISO 1001 for Magnetic Tape Labelling, full data interchange by means of such magnetic tape cartridges.

La présente norme s'applique aux mesures jugées essentielles au bon ajustement des peignoirs et des robes de chambre à ceinture ou à boutons pour fillettes et garçonnets (tailles courantes TCS de 2 à 6X), pour filles (tailles courantes TCS de 7 à 16) et pour garçons (tailles courantes TCS de 7 à 20).

La présente norme s'applique aux mesures jugées essentielles au bon ajustement des dormeuses molletonnées en tissus non extensibles et des dormeuses une pièce en tissu tricoté extensible pour les bébés portant des couches. Les dormeuses qui s'étirent dans le sens horizontal et dans le sens de la longueur du vêtement ne sont pas exclues dans la mesure où l'extensibilité dans le…

This dimensional standard applies to pajamas for wear by men. It has been developed for use in procurement of pajamas for patients in hospitals and institutions. A maximum residual shrinkage of 2% has been recognized in specifying the dimensions with the exception of the elastic waist dimensions in Table 2 where shrinkage in excess of 2% has been recognized.

1.1 This standard designates a series of six basic colours for size identification of various types of hospital and institutional clothing and linen. 1.2 Method of application of coloured size identifying materials is not covered in this standard (par. 5.1).

1.1 This standard applies to a yellow isolation gown of one size constructed of polyester/cotton blend fabrics, intended for use in hospitals as a protective gown, nursery gown, or visitor's gown. 1.2 Polyester/cotton blend fabrics should be used only in areas where synthetic garments are permitted, and where static electricity is not a hazard.

This standard applies to the construction requirements of uniform dress coats, jackets and tunics made with fusible interlining, fully lined or half lined, which have set-in sleeves. Fusible interlining is used in the foreparts, facings, collars, pocket flaps, pocket stays, sleeve bottoms, edges and vents.