Rechercher

This National Standard of Canada is based on International Standard IEC 922:1989, Including A1-1990 and A2-1992. 1. Scope This standard specifies safety requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low- pressure sodium vapour, high-pressure sodium vapour and metal halide lamps. Section One specifies general requirements and Section Two specifies…

This National Standard of Canada is based on International Standard IEC 928:1995. 1. Scope This standard specifies general and safety requirements for electronic ballasts for use on a.c. supplies up to 1000 V at 50 Hz or 60 Hz with operating frequencies deviating from the supply frequency, associated with tubular fluorescent lamps as specified in IEC 81 and other tubular fluorescent lamps for…

This National Standard of Canada is equivalent to International Standard ISO 11134:1994. 1 Scope This International Standard specifies requirements for the use of moist heat in sterilization process development, validation of the sterilization process and control of routine sterilization. It covers all moist heat proceses, including saturated steam and air-steam mixtures, and applies to all…

This National Standard of Canada is based on International Standard CEI/IEC 598-2-2:1996 (second edition, 1996-05), including Amendment 1:1997. 2.1 Scope This section of IEC 598 specifies requirements for recessed luminaires for use with tugsten filament, tubular fluorescent and other discharge lamps to be installed and used on branch circuits not exceeding 750 V and used in accordance…

1. Scope 1.1 This Special Publication provides a hypothetical case study of the application of CSA Standard CAN/CSA-Z809. It is not a mandatory Standard and is not intended to be used by auditors when assessing compliance of woodlots and woodlot owner associations with the requirements of CSA Standard CAN/CSA-Z809.

Preface This is the first edition of PLUS 1138, An Integrated Checklist for Quality Management Systems and Environmental Management Systems. This publication provides an integrated series of questions based on the requirements of ISO 9001, Quality systems - Model for quality assurance in design, development, production, installation and servicing, ISO 9002, Quality systems - Model for…

Preface This is the first edition of PLUS 1139, An Integrated Checklist for Environmental Management Systems and Sustainable Forest Management Systems. This publication provides an integrated series of questions based on the requirements of ISO 14001, Environmental management systems - Specification with guidance for use and CAN/CSA-Z809, A Sustainable Forest Management System:…

1. Scope 1.1 This Standard applies to (a) all windows covered by CSA Standard A440, including (i) vertical sliding windows; (ii) horizontal sliding windows; (iii) tilt-and-turn windows; (iv) casement windows, both fixed and operable; (v) projecting (awning/hopper) windows; and (vi) fixed windows, including fixed-window sidelights and transom windows; (b) sliding glass doors covered…

This National Standard of Canada is based on International Standard CEI/IEC 598-2-7:1982 (first edition, 1982), including Amendments 1:1987 and 2:1994. 1. Scope This section of Part 2 of IEC Publication 598 specifies requirements for portable pedestal luminaires, for use in places such as gardens and for portable luminaires for use in places such as flower beds, for use with tungsten…

This National Standard of Canada is based on International Standard CEI/IEC 598-2-8:1996 (second edition, 1996-07), including Amendment 1:2002. Note - Amendment No. 1 reaffirmed 2007-03-28. 1. Scope This section of Part 2 of IEC Publication 598 specifies requirements for handlamps and similar portable luminaries which are held in the hand when used, for use with tungsten filament and…