1. SCOPE
1.1
These requirements cover the construction and performance, exclusive of performance during fire tests, of portable foam-type fire extinguishers. Foam fire extinguishers are intended to be utilized in accordance with the Standard
for Portable Fire Extinguishers, NFPA 10.
1.2
The requirements for performance during fire testing of foam fire extinguishers are specified in…
1. Scope
1.1
This Standard provides requirements for playspaces and equipment intended for
use by children aged 18 months to 12 years.
Notes:
(1) The level of challenge required and desired by children varies enormously
with age, physical development and emotional development. Consequently, it is
almost impossible to design a piece of play equipment that meets the needs of
all…
1. SCOPE
1.1 These requirements cover combination locks designed for attachment on
doors of safes, chests, vaults, and the like, to provide a means of locking the
boltwork against unauthorized opening.
1.2 These requirements are intended to test the ability of combination locks
to resist unauthorized opening of the lock by manipulation methods such as
sense or sight, touch, hearing or…
1. SCOPe
1.1 These requirements cover mechanical key locks categorized as follows:
A Cabinet locking cylinder;
B Door locks;
C Locking cylinders;
D Security container key locks utilizing Type 1 and Type 2 locks; and
E Two-key locks.
1.2 At the manufacturer's option, a suffix 'C' may be used to denote a key
lock which…
1. SCOPE
1.1 These requirements cover delayed-action timelocks intended for attachment
on the doors of chests, and the like, to provide a means for delaying unlocking
for a predetermined length of time as protection against robbery.
1.2 The delayed-action automatic devices are factory set to a minimum delay of
5 min.
Standard for Burglary Resistant Electronic Combination Locks
1. SCOPe
1.1 These requirements cover burglary resistant electronic combination locks
designed for attachment on doors of safes, chests, vaults, automated banking
machines, depository units, and the like, to provide a means of locking the
boltwork against unauthorized opening.
1.2 These requirements are intended to test the ability of burglary resistant
electronic combination locks to…
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: ...
Gives the requirements for one type of heat-shrinkable, flame retarded, fluid resistant, polvinylidene fluoride sleeving with a temperature index of 175 and a nominal shrink ratio of 2:1. This sleeving is normally supplied with internal diameter up to 25,4 mm and the standard colour is transparent.
Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuille 228:...
Donne les prescriptions relatives à un type de gaines thermoretractables en polyoléfine dont l'indice de température est de 175 et ayant un rapport de retreint nominal de 2:1.
Elle est normalement fournie avec un diamètre intérieur allant jusqu'à 25,4 mm et la couleur standard est transparente.
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 217: ...
Gives the requirements for one type of heat-shrinkable, flame retarded polyolefin sleeving with a temperature index of 135 and a nominal shrink ratio of 3:1. It is normally supplied with internal diameter up to 39 mm and in the following standard colours: black, brown, red, yellow, green, blue, orange, violet, grey and white.
Information technology - Configuration of Customer Premises Cabling (CPC) for applications - Part 2:...
This standard specifies Customer Premises Cabling for the connection of customer premises equipment with 1,544 Mbit/s and 2,048 Mbit/s interfaces to ISDN primary access and leased lines. The requirements in this standard are derived from ITU-T I.431 (Blue Book, Volume III) and contain additional requirements as well as modifications of ITU-T I.431 and IEC 60603-7. This part of ISO/IEC 14709 is…
