Information technology - Fibre distributed data interface (FDDI) - Part 25: Abstract test suite for ...
The Station Management (SMT) Abstract Test Suite (ATS) directly supports the FDDI Protocol Implementation Conformance Statement (PICS) Proforma and works in correlation with three other FDDI ATS standards. This ATS for FDDI SMT provides the test procedures and test cases required to test the station management protocol described in the SMT standards. SMT specified the local portion of the system…
Protective devices against diagnostic medical X-radiation - Part 3: Protective clothing and protecti...
IEC 61331-3:1998 applies to protective devices such as protective clothing for the protection of persons against X-radiation up to 150 kV, during radiological examinations and interventional procedures. It deals with general requirements on the accompanying documents, and on the design and materials used and with standard sizes, particular design features, minimum attenuation properties of…
Protective devices against diagnostic medical X-radiation - Part 3: Protective clothing and protecti...
IEC 61331-3:1998 applies to protective devices such as protective clothing for the protection of persons against X-radiation up to 150 kV, during radiological examinations and interventional procedures. It deals with general requirements on the accompanying documents, and on the design and materials used and with standard sizes, particular design features, minimum attenuation properties of…
Safety of laser products - Part 5: Manufacturer's checklist for IEC 60825-1
Applies to laser products as described in IEC 60825-1.
This checklist is intended for use by manufacturers of laser products and their agents to establish that each new or modified design complies with the requirements of IEC 60825-1.
This document is not to be considered as an International Standard.
Low-voltage switchgear and controlgear - Part 1: General rules
Applies, when required by the relevant product standard, to switchgear and controlgear hereinafter referred to as "equipment" and intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c. It states those general rules and requirements which are common to low-voltage equipment as defined in Subclause 1.1, including for example:…
Graphic technology — Process control — Certified reference material for opaque area calibration of t...
This International Standard defines requirements for a half-tone certified reference material which may be used for the opaque area percentage calibration of transmission densitometers or colorimeters for use in the graphic arts.
This International Standard is not applicable to the calibration of transmission densitometers in terms of ISO standard diffuse density.
NOTE Test methods for…
This International Standard specifies the nominal sizes of photographic glass plates, together with cutting dimensions and their tolerances. It also specifies the nominal substrate thicknesses and their tolerances.
This Technical Report gives, for each material family
and for each minimum shear stress, the material(s) to
be used for the manufacture of solid rivets.
These materials ensure interchangeability of the products
concerned.
This Technical Report applies when referenced in the
relevant standard.
Information technology -Telecommunications and information exchange between systems - Private Integ...
This International Standard specifies the additional network feature Common Information (ANF-CMN), which is applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in ISO/IEC 11574.
ANF-CMN is an additional network feature which enables the exchange of Common Information between entities acting on behalf of the two ends of a…
