1 Scope
1.1 Applicable equipment
This Standard applies to newly produced outdoor cooking gas appliances (see Clause 3) constructed entirely of new, unused parts and materials. Outdoor cooking gas appliances submitted for examination under this Standard are classified as portable, stationary, or built-in.
1.2 Applicable equipment for recreational vehicle
This Standard applies to outdoor…
1 Scope
1.1
This Standard covers polymeric subsurface stormwater management structures and accessories used in the collection, detention, retention, and infiltration of stormwater runoff. Applications include, but are not limited to, commercial, municipal, residential, agricultural, industrial, recreational, and highway drainage.
Note: In the CSA B184 Series, polymeric subsurface stormwater…
Household and similar electrical appliances — Safety — Part 2-27: Particular requirements for applia...
1 Scope
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of electrical appliances incorporating
emitters for exposing the skin to optical radiation (wavelength 100 nm to 1 mm), for household
and similar use, their rated voltage being not more than 250 V for single-phase appliances
and 480 V for other appliances.
NOTE 101 Battery-operated…
1 Scope
1.1 General
This Standard, following the principles set out in CSA Z45001, specifies requirements for
a)
establishing and maintaining a WAH management system in accordance with OHSMS principles;
b)
the roles and responsibilities of the organization, the supervisor, and the workers;
c)
management of contractors;
d)
establishing the parameters of types of work at heights;
e)…
Design and construction of low-rise residential and small buildings to resist high wind
1 Scope
1.1 General
This Standard contains best practice guidance for the design and construction of low-rise, wood-frame buildings to withstand high winds corresponding to EF-2 tornado-level wind speeds, assumed to be associated with a reference velocity pressure of 1 kPa. The guidance in this Standard is based on, and written to, supplement the requirements specified in Part 9 of the National…
Denatured fuel ethanol for use in automotive spark-ignition fuels
This standard applies to denatured fuel ethanol, a blending component that is used solely as a component of
automotive spark-ignition fuels.
These automotive spark-ignition fuels include:
CAN/CGSB-3.511 — Oxygenated automotive gasoline containing ethanol (E1-E10 and E11-E15), and
CAN/CGSB-3.512 — Automotive ethanol fuel (E50-E85 and E20-E25).
The testing and evaluation of a product against…
Éthanol-carburant dénaturé destiné aux carburants automobiles pour moteurs à allumage commandé
La présente norme s’applique à l’éthanol-carburant dénaturé, qui est utilisé uniquement comme composant des
carburants automobiles pour moteurs à allumage commandé.
Les carburants automobiles pour moteurs à allumage commandé comprennent les carburants suivants :
CAN/CGSB-3.511 — Essence automobile oxygénée contenant de l’éthanol (E1 – E10 et E11 – E15);
CAN/CGSB-3.512 — Carburant éthanol pour…
Automated hydrometeorological monitoring stations: Site selection, instrument installation, and inst...
1 Scope
1.1 Object
This Standard provides Canadian monitoring network operator requirements and recommendations for selecting sites for automated, surface-based, hydrometeorological monitoring stations, and broad guidance for installing and maintaining commonly used automated hydrometeorological instrumentation.
This Standard has two main technical sections:
a)
Clause 4, on station…
Information technology - Codes for the representation of human sexes
This document specifies a uniform representation of human sexes for the interchange of information. It is intended to:
— reduce the time required to record and/or format the representation of sexes and transmit the corresponding data;
— improve clarity and accuracy of interchange;
— minimize the amount of human intervention required for communicating the representation of sexes; and…
Information technology — Codes for the representation of human sexes
This document specifies a uniform representation of human sexes for the interchange of information. It is intended to:
— reduce the time required to record and/or format the representation of sexes and transmit the corresponding data;
— improve clarity and accuracy of interchange;
— minimize the amount of human intervention required for communicating the representation of sexes; and…