Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-4: Radio d...
1 Scope
This part of CISPR 16 specifies the characteristics and performance of equipment for the
measurement of radiated disturbances in the frequency range 9 kHz to 18 GHz. Specifications
for antennas and test sites are included.
NOTE In accordance with IEC Guide 107, CISPR 16-1-4 is a basic EMC publication for use by product
committees of the IEC. As stated in Guide 107, product committees…
Medical gas pipeline systems — Part 1: Pipelines for medical gases, medical vacuum, medical support ...
1 Scope
1.1 General
This Standard specifies safety requirements for pipelines for medical gases, medical vacuum, medical
support gases, and anaesthetic gas scavenging systems in health care facilities, both public and private.
It applies to all facilities providing health care services, regardless of type, size, location, or range of
services, including, but not limited to
a) acute care…
Safety and control devices for gas and/or oil burners and appliances — General requirements
1 Scope
This document specifies safety, construction, performance and testing requirements for controls for gas burners and gas burning appliances for use with natural gas, manufactured gas or liquefied petroleum gas (LPG).
This document applies to controls for use at maximum operating pressures up to and including 500 kPa. This document provides the general requirements that are intended to be…
Agricultural sprayers — Recording of spray drift parameters
This document defines requirements on the electronic measurements (during spray operation) and recording of operator-controlled application parameters that influence spray drift, when specified for certain drift reduction technologies (DRT).
The values measured and recorded can be used to compare the setting of the sprayer with the provisions authorized for the specific DRT.
The document is…
1 Scope
1.1 This standard specifies the requirements for devices intended for positioning, which may include
bundling, routing, locating, and securing of cable, wire, conduit, or tubing used in a wiring system in
electrical installations in accordance with CSA C22.1, Canadian Electrical Code (CE Code), Part I, in
Canada and the National Electrical Code (NEC), NFPA 70 in the United States of…
Indoor Air Quality in Buildings and Facilities Utilized for the Cultivation and Post-Harvest Process...
1.1 This Standard provides minimum indoor air quality (IAQ) requirements and guidelines for a building
or portions of a building utilized for cannabis cultivation, post-harvest processing as well as ancillary
spaces.
Note: For the purposes of this Standard, ancillary spaces include areas that support the general operations required to run a
cannabis facility. Examples include but are not…
ALARM AND ELECTRONIC SECURITY SYSTEMS – PART 11-2: ELECTRONIC ACCESS CONTROL SYSTEMS – APPLICATION G...
This part of IEC 60839 defines the minimum requirements and guidance for the installation and operation
of electronic access control systems (EACS) and/or accessory equipment to meet different levels of
protection.
This standard includes requirements for planning, installation, commissioning, maintenance and
documentation for the application of EACS installed in and around buildings and areas…
Fibre optic communication subsystem test procedures - Part 4-3: Installed passive optical networks -...
IEC 61280-4-3: 2022 describes the measurement of attenuation, optical return loss and optical power in installed passive optical networks (PONs) using single-mode fibre. This document specifies two methods for measuring the attenuation before activation of the PON:
method A: one-cord method using a light source and a power meter (LSPM);
method B: optical time-domain reflectometer (OTDR)…
Telecommunications and information exchange between systems — Specific requirements for local and me...
The scope of this standard is to define one medium access control (MAC) and several physical layer (PHY) specifications for wireless connectivity for fixed, portable, and moving stations (STAs) within a local area.
Fibre optic interconnecting devices and passive components - Performance standard - Part 053-02: Non...
IEC 61753-053-02: 2022 contains the minimum initial test and measurement requirements and severities which non-connectorized single-mode fibre electrically controlled variable optical attenuator needs to satisfy in order to be categorised as meeting the requirements of category C – Controlled environments, as defined in Annex A of IEC 61753-1:2018.
This first edition cancels and replaces IEC…
