Rechercher

This document specifies single sampling plans for lot-by-lot inspection under the following conditions: a) where the inspection procedure is applied to a continuing series of lots of discrete products, all supplied by one producer using one production process; b) where only a single quality characteristic, x, of these products is taken into consideration, which is measurable on a continuous scale…

IEC TS 62351-100-6:2022 (E), which is a technical specification, is part of the IEC 62351 suite of standards, which describes test cases for interoperability conformance testing of data and communication security for Substation Automation Systems [SAS] and telecontrol systems which implement IEC TS 62351-6. The tests described in this part do not evaluate the security of the implementation. Thus…

IEC 60598-2-18:2022 specifies requirements for fixed luminaires intended for use in water, or in contact with water, in, for example, the basins of swimming pools, fountains, paddling pools, and garden pools, and for use with electric light sources. This third edition cancels and replaces the second edition published in 1993 and Amendment 1:2011. This edition constitutes a technical revision.…

This document describes compatibility for ensembles of personal protective equipment (PPE) to be used by personnel where operating situations and processes require more than one piece of PPE. Where there is more than one risk to health and safety, it is necessary to wear or use more than one item of PPE at the same time. Such equipment should be compatible and continue to be effective to minimise…

This Standard contains health effects requirements for drinking water treatment chemicals that are directly added to water and are intended to be present in the finished water. This Standard also contains health effects requirements for other chemical products that are directly added to water but are not intended to be present in the finished water. Chemicals covered by this Standard include,…

This document specifies methods for the determination of the modulus in shear and the strength of bonds of rubber to metal or other rigid plates, using rubber bonded between four parallel plates. Method A describes the determination of the modulus in shear. Method B describes the determination of the strength of the bonds. The methods are applicable primarily to test pieces prepared in the…

This document specifies tolerances, design features and test methods for thin-walled half bearings with integral flange up to an outside diameter of Do = 250 mm and without flange up to an outside diameter of Do = 500 mm. Due to the variety of design, it is, however, not possible to standardize the dimensions of the half bearings. Half bearings according to this document are predominantly used in…

This document specifies a set of standard large gamut colour images (encoded as 16-bit CIELAB digital data) that can be used for the evaluation of changes in image quality during coding, image processing (including transformation, compression and decompression), displaying on a colour monitor and printing. These images can be used for research, testing and assessing of output systems such as…

This document defines procedures for determining the standard thermal outputs and other characteristics of radiators and convectors installed in a permanent manner in construction works, fed with water or steam at temperatures below 120 °C, supplied by a remote energy source. This document specifies the laboratory arrangements and testing methods to be adopted, the admissible tolerances, the…

This document provides an appropriate reference spectral irradiance distribution to be used in determining relative performance of solar thermal, photovoltaic, and other systems, components and materials where the direct or hemispherical irradiance component is desired. This document provides one reference hemispherical irradiance spectrum, one reference direct normal irradiance spectrum and 171…