Intelligent transport systems — Roadside modules SNMP data interface — Part 4: Notifications
Field devices are a key component in intelligent transport systems (ITS). Field devices include traffic signals, message signs, weather stations, traffic sensors, roadside equipment for connected ITS (C-ITS) environments, etc.
Field devices often need to exchange information with other external entities (managers). Field devices can be quite complex, necessitating the standardization of many data…
Information technology — Radio frequency identification for item management — Part 63: Parameters fo...
1 Scope
This document defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz industrial, scientific, and medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used to develop RFID application standards. This document is intended to allow for compatibility and to…
Information technology — Data centre facilities and infrastructures — Part 1: General concepts
1 Scope
This document:
a) describes the general principles for data centres upon which the requirements of the ISO/IEC 22237 series are based;
b) defines the common aspects of data centres including terminology, parameters and reference models (functional elements and their accommodation) addressing both the size and complexity of their intended purpose;
c) describes general aspects of the…
Information technology — Data centre facilities and infrastructures — Part 3: Power distribution
1 Scope
This document addresses power supplies to, and power distribution within, data centres based upon the criteria and classifications for “availability”, “physical security” and “energy efficiency enablement” within ISO/IEC 22237-1.
This document specifies requirements and recommendations for the following:
a) power supplies to data centres;
b) power distribution systems to all equipment…
Telecommunications and exchange between information technology systems — Requirements for local and ...
1.1 Scope
For the purpose of providing compatible authentication, authorization, and cryptographic key agreement
mechanisms to support secure communication between devices connected by IEEE 802® Local Area
Networks (LANs), this standard
a) Specifies a general method for provision of port-based network access control.
b) Specifies protocols that establish secure associations for IEEE Std 802.…
Fenestration energy performance/User Guide to CSA A440.2:22, Fenestration energy performance
1 Scope
1.1 General
This Standard applies to
a)
fenestration systems covered by AAMA/WDMA/CSA 101/I.S.2/A440, including
i)
vertically sliding windows;
ii)
horizontally sliding windows;
iii)
dual-action windows;
iv)
casement windows, both fixed and operable;
v)
projecting (awning/hopper) windows;
vi)
fixed windows;
vii)
sidelites;
viii)
transom windows;
ix)
sliding doors;
x…
Data governance – Part 2: Third-party access to data
This Standard specifies minimum requirements for granting and controlling third-party access to data.
This Standard applies to all organizations, including public and private companies, government entities,
and not-for-profit organizations.
Methods of testing petroleum and associated products - Low temperature flow test (LTFT) for diesel f...
1.1 This method describes a procedure for determining the filter plugging tendency of diesel fuels at low
temperature, usually due to the formation of wax crystals (see note in 6.1).
1.2 The method applies to all distillate diesel fuels. Fuels are expected to provide satisfactory fuel flow in
automotive equipment at temperatures equal to or higher than the minimum pass temperature as described…
CanadaMéthodes d’essai des produits pétroliers et produits connexes – Essai d’écoulement à basse tem...
1.1 La présente méthode permet de déterminer la tendance des combustibles diesels à colmater les filtres à
basse température généralement en raison de la formation de cristaux de cire (voir la note en 6.1).
1.2 La méthode s’applique à tous les combustibles diesels distillés. Il est prévu que les combustibles s’écouleront
librement dans le matériel automobile à des températures égales ou…
Non-destructive testing — Qualification and certification of NDT personnel (ISO 9712:2021, IDT)
This document specifies requirements for the qualification and certification of personnel who perform industrial non-destructive testing (NDT) in the following methods.
a) acoustic emission testing;
b) eddy current testing;
c) leak testing (hydraulic pressure tests excluded);
d) magnetic testing;
e) penetrant testing;
f) radiographic testing;
g) strain gauge testing;
h) thermographic…
