Rechercher

The Standard aims to define terms and definitions for digital governance and technologies in both English and French to ensure that definitions are consistent between standards and aligned in both languages. This Standard applies to all sectors, including public and private companies, government entities, and not-for-profit organizations. La présente norme vise les termes et…

1 Scope 1.1 Overview This Standard provides minimum requirements for the manufacture of MLT using laminations of graded lumber connected parallel to each other along the wide face with metal or wooden fasteners. 1.2 Inclusions Two qualification paths are provided for prescriptive and custom MLT, respectively, in this Standard: a) For prescriptive MLT, the design specifications (in the form…

This document provides definitions, symbols and injury probability functions (IPFs) for the thigh, leg and knee intended to be used with the advanced pedestrian legform impactor (aPLI), a standardized pedestrian legform impactor with an upper mass for pedestrian subsystem testing of road vehicles. They are applicable to impact tests using the aPLI at 11,1 m/s involving: —    vehicles of category…

Scope 1.1 This standard applies to electrically operated bells, sirens, horns, and similar audible signaling devices, rated at 300 V or less, for fire alarm and signaling systems and intended for indoor and/or outdoor installation: a) In Canada only: in accordance with CSA C22.1, Canadian Electrical Code, Part I, Safety Standard for Electrical Installations; and with ULC-S524, Standard for…

This Standard addresses the safety of electrical and electronic equipment within the field of virtual reality, augmented reality and mixed reality technologies with a rated voltage not exceeding 600 V. EXAMPLE VR/AR/MR head-mounted displays, holographic displays, AR/MR smart glasses, hand-held VR/AR/MR devices and interactive virtual simulators. Particular aspects addressed by this Standard…

The ISO 19124 series is focused on calibration and validation (Cal/Val) of remote sensing data, which are collected by a sensor on-board a platform in a mission, and products derived in part or whole from the data. The ISO 19124 series defines the metadata related to the calibration and validation process that has not been defined in other ISO/TC 211 International Standards. The metadata allows…

This document is intended to be used alongside ISO/TR 12295, ISO 11226, the ISO 11228 series and ISO/TR 23476 in the construction sector. This document (although the examples shown refer only to the civil construction sector) gives information on how existing standards can be used in a global sector, such as construction. Where biomechanical overload is a relevant aspect, albeit with different…

Scope 1.1 This Standard applies to visual signaling devices intended for indoor and/or outdoor installation: a) In Canada only: in accordance with CSA C22.1, Canadian Electrical Code, Part I, Safety Standard for Electrical Installations; and with ULC-S524, Standard for Installation of Fire Alarm Systems. b) In the United States only: in accordance with the National Electrical Code, NFPA 70,…

This document specifies a methodology and provides related requirements, recommendations and guidance for the design and integration of safety‐related parts of control systems (SRP/CS) that perform safety functions, including the design of software. This document applies to SRP/CS for high demand and continuous modes of operation including their subsystems, regardless of the type of technology…

This document defines the generic concept and common framework of unmanned aircraft system (UAS) remote identification, which is mainly used to electronically identify an in-flight unmanned aircraft (UA). This document sets the minimum performance standards for direct remote identification. This document does not cover requirements for modules installed in UA or requirements for network remote…