Electrical installations of buildings - Part 1: Scope, object
and fundamental principles
Applies to electrical installations such as those of:
a)residential premises
b)commercial premises
c)public premises
d)industrial premises
e)agricultural and horticultural premises
f)prefabricated buildings
g)caravans, caravan sites and similar sites
h)construction sites, exhibitions, fairs and other temporary
installations.
i)marinas and pleasure craft
Covers:
a)circuits supplied at nominal…
1. Scope
1.1 General
This Standard applies to the electrical requirements for park model trailers
that are intended to be connected by a cord and attachment plug to a source of
electrical supply not exceeding 250 V between conductors or 150 V to ground and
50 A maximum in accordance with the Rules of the Canadian Electrical Code, Part
I.
1.2 Nonapplicable Types
This Standard does…
1. Scope
Z241.0
1.1 This Standard provides the definition of the term park model trailer as used in the CAN/CSA-Z241 Series, Park Model Trailers. It also gives general safety requirements that apply to the other Standards in the CAN/CSA-Z241 Series.
Z241.1
1.1 Requirement Specification This Standard specifies vehicular requirements for park model trailers including minimum…
Commentary to CSA Standard CAN/CSA-S472-92, Foundations
This Commentary applies to the design of foundations for fixed offshore
structures. The term "foundation" is defined as the seabed, any fill, and any
artificial elements (eg, piles or skirts) that penetrate or rest upon these
materials and that in whole or in part support production structures and
facilities. The Standard is divided into subsections that address
(a) site…
Installation Code for Solid-Fuel-Burning Appliances and Equipment
1. Scope
1.1
Except as stated in Clause 1.3, this Standard covers requirements for the
installation of, alteration to, addition to, and provisions for maintenance of
solid-fuel-burning appliances and equipment intended to supply heat to air or
water.
Note: Recommendations for the storage of solid fuel and of ash are included in
Appendix A.
1.2
For the purpose of this Standard, solid…
Low-voltage switchgear and controlgear assemblies. Part 4: Particular requirements for assemblies fo...
This standard applies to type-tested assemblies (TTA) intended for use on construction sites, i.e. temporary places of work to which the public do not generally have access and where building construction, installation, repairs, alteration or demolition of property (buildings) or civil engineering (public works) or excavation or any other similar operations are carried out. These assemblies may…
Standard for Shop Fabricated Steel Aboveground Utility Tanks for Flammable and
Combustible Liquids
1. SCOPe
1.1 These requirements cover single and double wall cylindrical horizontal
steel tanks of the non-pressure type that are used for the aboveground storage
of flammable and combustible liquids with a relative density not greater than
1.0, such as gasoline, fuel oil, or similar products.
1.2 Section 3 of these requirements cover single wall tanks.
1.3 Section 4 of these…
Measurement methods for building — Setting-out and measurement — Part 1: Planning and organization, ...
Deals with the different stages of the setting out work, i.e. the measuring of the primary framework (traverses, grids, etc.) on the site, the setting out of reference lines (baselines), the transfer (plumbing up) of reference lines to other floors, the setting out of position points and the levelling procedure for these different stages. Gives values for permissible deviations when measuring and…
Woodworking machines — Circular sawing machines for building sites — Nomenclature
Specifies the nomenclature appropriate to the various parts of these sawing machines in order to assist manufacturers and users in the identification of these parts. Gives in addition to terms used in two of the three official ISO languages (English and French) the equivalent terms in the German, Spanish and Italian languages.
