Rechercher

This National Standard of Canada is based on International Standard CEI/IEC 60335-2-69: 1997 (second edition, 1997-02), with Amendment 1:2000. 1 Scope This clause of part 1 is applicable except as follows: Addition: This standard applies to electrical motor-operated vacuum cleaners and includes appliances and stationary equipment specifically designed for wet suction, dry suction, or…

1. Scope Note: In many guidelines, all waste contaminated with blood or body fluids is classified as biomedical waste. This enormously increases the volume of waste requiring expensive handling and disposal. Identical items of waste are disposed of from homes with no special handling or decontamination. The identification of every client who carries a blood borne pathogen including, but…

This CSA Standard is a Harminized Standard with ANSI Z21.75-2001. Part I: Construction 1.1 Scope 1.1.1 This standard applies to newly produced assembled connectors constructed entirely of new, unused parts and materials. Such connectors are intended for exterior use above ground for making the following nonrigid connections: a. Between the gas supply and the gas…

1. Scope 1.1 The purpose of this Standard is to define accessibility requirements for automated banking machines (ABMs) and ABM sites. Note: While the purpose of the Standard is to make the product or environment more usable, there may be some people with disabilities who have requirements beyond the level described in this Standard. 1.2 This Standard describes technical requirements that…

Specifies general and testing requirements for electrical resistance trace heaters for application in explosive gas atmospheres. The standard covers trace heaters that may comprise either factory- or field- (work-site) assembled units, and which may be series heating cables, parallel heating cables or heating pads and heating panels that have been assembled and/or terminated in accordance with…

1. Scope 1.1 This Standard provides requirements for the installation of, alteration to, and maintenance of solid-fuel-burning appliances and equipment intended to supply heat to air or water or for cooking. Note: Recommendations for the storage of solid fuel and of ash are included in Annex A. 1.2 For the purpose of this Standard, solid-fuel-burning appliances include (a) furnaces; (…

1. Scope 1.1 This Standard covers the procedure for certification of factory-built houses, including modular, panelized, and mobile homes. It provides for (a) certification of the plant quality program; (b) certification of the product built; (c) auditing of the plant quality program; and (d) in-plant inspection of the product built. 1.2 This Standard does not cover those portions…

1. SCOPe 1.1 These requirements cover single and double wall cylindrical horizontal steel non-pressure tanks that are used for the aboveground storage of flammable and combustible liquids with a relative density not greater than 1.0, such as gasoline, fuel oil, or similar products. 1.2 Section 3 of these requirements covers single wall tanks. 1.3 Section 4 of these requirements covers double…

1.1 General This part of ISO 230 specifies methods for testing the noise of stationary floor-mounted machine tools and related auxiliary equipment directly on the shop floor. The purpose of the measurements is to obtain noise-emission data for machine tools. The data obtained may be used for the purpose of declaration and verification of airborne noise emission from machine tools as specified in…