Rechercher

ISO 26429-6:2008 defines the syntax of encrypted digital cinema non-interleaved material exchange format (MXF) frame-wrapped track files and specifies a matching reference decryption model. It uses the advanced encryption standard (AES) cipher algorithm for essence encryption and, optionally, the HMAC-SHA1 algorithm for essence integrity. The digital cinema track file format is designed to carry…

IEC 61512-3:2008 on Batch Control defines a model for general and site recipes; the activities that describe the use of general and site recipes within a company and across companies; a representation of general and site recipes; and a data model of general and site recipes. This first edition cancels and replaces IEC/PAS 61512-3, published in 2004.

This National Standard of Canada is based on International Standard CEI/IEC 61936-1:2002. 1 Scope This part of IEC 61936 provides, in a convenient form, common rules for the design and the erection of electrical power installations in systems with nominal voltages above 1 kV a.c. and nominal frequency up to and including 60 Hz, so as to provide safety and proper functioning for the use…

IEC/TS 62395-2:2008 provides detailed recommendations for the system design, installation, maintenance and repair of electrical resistance trace heating systems in industrial and commercial applications. Pertains to trace heating systems that may comprise either factory constructed or field (work-site) assembled units, and which may be series heater cables, parallel heater cables, heater pads or…

ISO 12576-2:2008 establishes three systems for the conformity control of thermal insulating products that are manufactured on-site from components produced in a factory and provides the minimum requirements for each system. Examples of these types of products are loose fill and spray-applied insulations. The purpose of ISO 12576-2:2008 is to provide uniform methods to determine whether the…

IEC/TS 62257-7-3:2008(E) specifies the general requirements for the selection, sizing, erection and operation of generator sets in decentralized rural electrification systems. Applies to all low voltage combustion engine electricity generator sets with a rated power up to 100 kVA, and designed for supplying electrical power to isolated sites used in systems as described in IEC/TS 62257-2.

ISO 8178-2:2008, together with ISO 8178-1 and ISO 8178-11, specifies the measurement and evaluation methods for gaseous and particulate exhaust emission from reciprocating internal combustion engines (RIC engines) under steady-state and transient conditions for field testing. ISO 8178-2:2008 is applied when RIC engines used in off-road vehicles, marine installations, generating sets, diesel rail…

This part of IEC 60825, which is a technical report, gives guidance on the planning and design, set-up and conduct of laser displays and shows that make use of high power lasers. The laser power needed to produce effective theatrical or artistic displays in large spaces such as theatres, arenas, or architectural sites is great enough to pose a severe accidental exposure hazard, even when personal…

ISO 10414-1:2008 provides standard procedures for determining the following characteristics of water-based drilling fluids: drilling fluid density (mud weight), viscosity and gel strength, filtration, water, oil and solids contents, sand content, methylene blue capacity, pH, alkalinity and lime content, chloride content and total hardness as calcium. ISO 10414-1:2008 provides additional test…

1 Scope 1.1 This Standard applies to manufactured and modular homes designed to be supported on longitudinal floor beams. Note: For simplicity, the term "manufactured home" is used in this Standard to refer to both manufactured homes and modular homes. 1.2 This Standard includes requirements for the following aspects of manufactured home installation: (a) site preparation; (b)…