Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 2: J...
1 Scope
This part of ISO 19905 provides a commentary to some clauses of ISO 19905-1 including background
information, supporting documentation, and additional or alternative calculation methods as applicable and
also provides a detailed sample 'go-by' calculation. ISO 19905-1 specifies requirements and guidance for the
site-specific assessment of independent leg jack-up units for…
STANDARD FOR INTERNAL RETROFIT SYSTEMS FOR UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
1 SCOPE
1.1 This Standard provides minimum requirements for nonmetallic internal retrofit systems intended for
field installation in underground tanks for the storage of flammable and combustible liquids, such as:
A Petroleum products, including petroleum hydrocarbon fuels with low bio-blends per
specifications and similar flammable or combustible liquid petroleum derivatives, such as fuel…
Medical electrical equipment - Part 2-64: Particular requirements for the basic safety and essential...
IEC 60601-2-64:2014 applies to the basic safety and essential performance of Light Ion Beam Medical Electrical equipment, hereafter referred to as ME equipment, used for treatment of patients. This particular standard, with the inclusion of type tests and site tests, applies respectively to the manufacture and some installation aspects of ME equipment intended for radiotherapy in human medical…
Indoor air — Part 30: Sensory testing of indoor air
ISO 16000-30:2014 specifies sensory testing and the evaluation of indoor odours using human panels. Sensory testing can be performed on site or in laboratories; in the latter case, by means of air in sampling containers which were collected from the site.
The olfactory testing is appropriate for office and administration buildings, assembly halls, residential buildings, and other habitable rooms…
Building construction machinery and equipment — Concrete pumps — Part 1: Terminology and commercial ...
ISO 21573-1:2014 establishes terminology and commercial-literature specifications for concrete pumps which are used on building sites for concrete-mix delivery.
Decommissioning of facilities containing nuclear substances
Scope
1.1
This Standard applies to the decommissioning of licensed facilities and other locations where nuclear substances are managed, possessed, or stored.
Notes:
(1) Users are responsible for determining the extent to which this Standard applies to a given facility or location and for
consulting the associated regulatory requirements.
(2) Annexes E, F, and G contain recommended…
Standard for Shop Fabricated Steel Aboveground Tanks for Flammable and Combustible Liquids
1 SCOPE
1.1 This Standard sets forth minimum requirements for steel, non pressure tanks that are used for the
aboveground storage of flammable and combustible liquids compatible with the material of construction
and with a specific gravity not greater than 1.0.
NOTE: These tanks may also be used for the storage of used oil. For tanks intended solely for the collection of used
oil, refer to…
Live working – Minimum approach distances for a.c. systems in the Voltage range 72,5 kV to 800 kV – ...
This International Standard describes a method for calculating the minimum approach
distances for live working, at maximum voltages between 72,5 kV and 800 kV. This standard
addresses system overvoltages and the working air distances or tool insulation between parts
and/or workers at different electric potentials.
The required withstand voltage and minimum approach distances calculated by the…
