This part of IEC 61000 for EMC immunity requirements applies to electrical and electronic
equipment intended for use in industrial locations, as described below. Immunity requirements
in the frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at
frequencies where no requirements are specified.
This generic EMC immunity standard is applicable if no relevant dedicated…
Soil quality — Sampling of soil invertebrates — Part 1: Hand-sorting and extraction of earthworms
This document specifies a method for sampling and handling earthworms from field soils as a prerequisite for using these animals as bioindicators (e.g. to assess the quality of a soil as a habitat for organisms).
This document applies to all terrestrial biotopes in which earthworms occur. The sampling design of field studies in general is given in ISO 18400‑101 and guidance on the determination…
Water quality — Sampling — Part 3: Preservation and handling of water samples
This document specifies general requirements for sampling, preservation, handling, transport and storage of all water samples including those for biological analyses.
It is not applicable to water samples intended for microbiological analyses as specified in ISO 19458, ecotoxicological assays, biological assays and passive sampling as specified in the scope of ISO 5667‑23.
This document is…
Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test met...
IEC 62153-4-7:2015+A1:2018 describes a triaxial method, suitable to determine the surface transfer impedance and/or screening attenuation and coupling attenuation of mated screened connectors (including the connection between cable and connector) and cable assemblies. This method could also be extended to determine the transfer impedance, coupling or screening attenuation of balanced or multipin…
Information technology — Data centre facilities and infrastructures — Part 2: Building construction
ISO/IEC TS 22237-2:2018 addresses the construction of buildings and other structures which provide accommodation for data centres based upon the criteria and classification for "physical security" within ISO/IEC TS 22237‑1 in support of availability.
ISO/IEC TS 22237-2:2018 specifies requirements and recommendations for the following:
a) location and site selection;
b) building…
Information technology - Data centre facilities and infrastructures - Part 2: Building construction
ISO/IEC TS 22237-2:2018 addresses the construction of buildings and other structures which provide accommodation for data centres based upon the criteria and classification for "physical security" within ISO/IEC TS 22237‑1 in support of availability.
ISO/IEC TS 22237-2:2018 specifies requirements and recommendations for the following:
a) location and site selection;
b) building…
Moteurs alternatifs à combustion interne — Mesurage des émissions de gaz d'échappement — Partie...
Le présent document spécifie un format de données pour consigner le résultat des mesurages des émissions des gaz d'échappement des moteurs alternatifs à combustion interne utilisés dans les installations mobiles, transportables et fixes, à l'exclusion des moteurs de véhicules conçus à l'origine pour des applications routières. Il contient les informations de base du moteur soumis à…
Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuri...
ISO 8178-6:2018 specifies a data format for reporting the measurement results of exhaust emissions from RIC engines for mobile, transportable and stationary use, excluding engines for motor vehicles primarily designed for road use. It includes basic information of the engine being tested. Equivalent data formats including those that are electronically generated can be used as long as the required…
Lifecycle risk management for integrated CCS projects
ISO/TR 27918:2018 is designed to be an information resource for the potential future development of a standard for overall risk management for CCS projects. The risks associated with any one stage of the CCS process (capture, transportation, or storage) are assumed to be covered by specific standard(s) within ISO/TC 265 and other national and/or international standards. For example, the risks…
Woodworking machines — Safety — Part 10: Building site saws (contractor saws)
ISO 19085-10:2018 gives the safety requirements and measures for displaceable building site saws, designed to cut wood and materials with similar physical characteristics to wood, hereinafter referred to as "machines".
NOTE 1 For the definition of displaceable machine, see ISO 19085‑1:2017, 3.5.
ISO 19085-10:2018 deals with all significant hazards, hazardous situations and events as…
