Rechercher

ISO 6165:2006 gives terms and definitions and an identification structure for classifying earth-moving machinery designed to perform the following operations: excavation, loading, transportation, and drilling, spreading, compacting or trenching of earth and other materials (e.g. during work on roads and dams, and on building sites). Its purpose is to provide a clear means of identifying machines…

ISO 14531-4:2006 provides guidance for the design, construction, installation and on-site testing of PE-X pipeline systems. The standard deals with trenchless and open-trench installation methods. ISO 14531-4:2006, when used in conjunction with the other parts of ISO 14531, provides the basis for the design, manufacture and installation of PE-X piping systems (PE-X pipes, and PE-X and PE heat-…

This National Standard of Canada is equivalent to International Standard ISO 19901-4:2003. 1 Scope This part of ISO 19901 contains requirements and recommendations for those aspects of geoscience and foundation engineering that are applicable to a broad range of offshore structures, rather than to a particular structure type. Such aspects are - site characterization, - soil and rock…

The electronic version of this International Standard can be downloaded from the ISO/IEC Information Technology Task Force (ITTF) web site.

This National Standard of Canada is based on International Standard CEI/IEC 60335-2-2:2002 +A1 :2004. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric vacuum cleaners and watersuction cleaning appliances for household and similar purposes, including vacuum cleaners for animal grooming, their rated voltage being not…

Applicable to the following on-site test voltages and in service stresses, which are in relation to IEC 60060-1: direct voltage;alternating voltage; lightning impulse voltage of aperiodic or oscillating shape: switching impulse voltage of aperiodic or oscillating shape.

L'ISO 16000-10:2006 spécifie une méthode générale d'essai en laboratoire pour la détermination du débit d'émission spécifique par unité de surface des composés organiques volatils (COV) provenant de produits de construction nouvellement fabriqués, dans des conditions climatiques définies. En principe, la méthode peut être également appliquée aux produits qui ont vieilli. Les…

ISO 16000-10:2006 specifies a general laboratory test method for determination of the area specific emission rate of volatile organic compounds (VOCs) from newly produced building products or furnishing under defined climate conditions. The method can also, in principle, be applied to aged products. The emission data obtained can be used to calculate concentrations in a model room. According to…

ISO 16784-2:2006 applies to corrosion and fouling in industrial cooling water systems ISO 16784-2:2006 describes a method for preliminary evaluation of the performance of treatment programmes for open recirculating cooling water systems. It is based primarily on laboratory testing but the heat exchanger testing facility can also be used for on-site evaluation. ISO 16784-2:2006 does not include…

L'ISO 16784-2:2006 s'applique à la corrosion et à l'entartrage des circuits de refroidissement à eau industriels L'ISO 16784-2:2006 décrit une méthode d'évaluation préalable des performances des programmes de traitement destinés aux circuits de refroidissement à eau à recirculation ouverts. Elle repose principalement sur des essais en laboratoire mais l'installation…