Scope
1.1
This Standard provides guidance for the safe use of lasers in health care. It applies to all procedures in health care settings where health-related lasers are used, including, but not limited to, the following:
a) health care facilities;
b) dental clinics, offices, and facilities;
c) veterinary facilities;
d) laboratories and other research facilities;
e) physician offices;
f)…
Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-2...
1 Scope and object
This clause of Part 1 is applicable, except as follows.
1.1.1 Equipment included in scope
Replacement:
This part of IEC 61010 specifies safety requirements and related verification tests for control
equipment of the following types:
– Programmable controllers (PLC and PAC);
– the components of Distributed Control Systems (DCS);
– the components of remote I/O – systems;
–…
Radiological protection — Performance criteria for service laboratories performing biological dosime...
ISO 19238:2014 provides criteria for quality assurance and quality control, evaluation of the performance, and the accreditation of biological dosimetry by cytogenetic service laboratories.
ISO 19238:2014 addresses
a) the confidentiality of personal information, for the customer and the service laboratory,
b) the laboratory safety requirements,
c) the calibration sources and calibration…
Plume scavenging in surgical, diagnostic, therapeutic, and aesthetic settings
Scope
1.1
This Standard applies to systems and equipment used to capture and evacuate plume. It applies to all settings where such systems and equipment are used, including, but not limited to, the following:
a) surgical facilities;
b) dental clinics;
c) medical offices;
d) veterinary facilities;
e) laboratories and other research and testing facilities;
f) cosmetic…
Sound and television broadcast receivers and associated equipment -Immunity characteristics - Limits...
CISPR 20:2006+A1:2013 applies to television broadcast receivers, sound broadcast receivers and associated equipment intended for use in the residential, commercial and light industrial environment. Describes the methods of measurement and specified limits applicable to sound and television receivers and to associated equipment with regard to their immunity characteristics to disturbing signals.…
Systèmes de récupération des vapeursdans les réseaux de distributiond’essence
1 Objet
La présente Norme nationale du Canada définit les exigences relatives à l’équipement, aux critères de rendement,
à la procédure à suivre et aux méthodes d’essai pour la mise en place de systèmes de récupération des vapeurs
(SRV) dans les réseaux de distribution d’essence comprenant des terminaux, des dépôts routiers, des stationsservice
et des camions-citernes qui sont couramment…
Scope
1.1
This Standard covers vitreous and non-vitreous china plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings. This Standard's performance requirements and test procedures apply to all types of water closets and urinals that discharge into gravity drainage systems in permanent buildings and structures, independent of occupancy…
Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 1: General principl...
ISO 12110-1:2013 establishes general principles for fatigue testing of laboratory specimens under a sequence of cycles the amplitude of which varies from cycle to cycle.
This sequence of cycles is called loading time history (see 3.7) and is usually derived from loading measurements performed on components or structures submitted to true service loadings.
Detailed description of service loads…
Medical device reprocessing - General requirements
Scope
1.1
This Standard is intended to form the basis of a QMS within a health care setting for the purpose of providing safe, reliable reprocessing of reusable medical devices and is designed to be used with the CSA Z314 series of Standards addressing specific aspects of medical device reprocessing.
A comprehensive QMS can be achieved when this Standard is used in combination with related…
Safe use of electrosurgical medical devices and systems in health care
Scope
1.1
This Standard applies to the use of medical devices and systems for the application of electrosurgical energy. It applies to all procedures in all health care settings where such medical devices and systems are used, including, but not limited to, the following:
a) surgical facilities;
b) dental clinics;
c) medical offices;
d) veterinary facilities;
e) laboratories and other…