Rechercher

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components. These measurements are performed in a laboratory test facility or in the field. The performance of the building components is expressed either as an overall quantity for the combination of elements and junction (such as the normalized flanking level difference and/…

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components. This document considers only laboratory measurements. The measured quantities can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as ISO 12354‑1 and ISO 12354‑2. However, the measured quantities Dn,f…

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components. ISO 10848-3:2017 specifies laboratory and field measurements of buildings for Type B elements (defined in ISO 10848‑1) when the junction has a substantial influence. Laboratory measurements are used to quantify the performance of the junction with suppressed…

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components. ISO 10848-4:2017 specifies laboratory and field measurements of buildings where at least one of the elements that form the construction under test is a Type A element (defined in ISO 10848‑1). Laboratory measurements are used to quantify the performance of the…

IEC 62232:2017 provides methods for the determination of radio-frequency (RF) field strength and specific absorption rate (SAR) in the vicinity of radiocommunication base stations (RBS) for the purpose of evaluating human exposure. This document: - considers intentionally radiating RBS which transmit on one or more antennas using one or more frequencies in the range 110 MHz to 100 GHz; -…

IEC 62232:2017 provides methods for the determination of radio-frequency (RF) field strength and specific absorption rate (SAR) in the vicinity of radiocommunication base stations (RBS) for the purpose of evaluating human exposure. This document:<br /> - considers intentionally radiating RBS which transmit on one or more antennas using one or more frequencies in the range 110 MHz to 100 GHz…

ISO 17781:2017 specifies quality control testing methods and test conditions for the characterization of microstructure in relation to relevant properties in ferritic/austenitic (duplex) stainless steel components supplied in the solution annealed condition and fabrication welds in the as welded condition. ISO 17781:2017 supplements the relevant product and fabrication standards with respect to…

1.1 This Standard covers plumbing fixtures made of stainless steel alloys and specifies requirements for materials, construction, performance, testing, and markings. Note: The term “corrosion-resisting steel” is also applied to stainless steel. 1.2 This Standard covers the following plumbing fixtures: a) bathtubs; b) bidets; c) drinking fountains and water coolers; d) lavatories; e…

quality in terms of characteristics defined in ISO/IEC 25012. This International Standard contains the following: — a basic set of data quality measures for each characteristic; — a basic set of target entities to which the quality measures are applied during the data-life-cycle; — an explanation of how to apply data quality measures; — a guidance for organizations defining their own measures for…

ISO 21018-4:2016 specifies a method for the determination of the particulate contamination level using the light extinction technique (also known as light blockage or light obscuration) either online or off-line in containers. It also defines procedures for calibrating the instruments and verifying their correct operation both in the laboratory and in service. In general, the techniques described…