Rechercher

Part 1 1 Scope 1.1 Except as indicated in Clause 1.2, Part 1 of this Standard applies to all boilers, pressure vessels, pressure piping, and fittings, as provided for by the Act (as defined in Clause 3) and identified in Part 1 of this Standard. Notes: 1) In certain provinces there may be variations in the size limitations specified in Part 1 of this Standard. The regulatory…

1 Scope 1.1 This Standard is intended for manufacturers and purchasers of machinery sold in, or exported from, Canada. It is also intended for regulators, acoustical professionals, and other interested parties. 1.2 This Standard is intended to provide a) guidance on the steps required to provide and verify noise emission declarations for machinery and equipment intended for the workplace; b)…

1. Scope 1.1 This Standard sets out requirements for spacers and/or holding chambers (S-HCs) for use with pressurized metered-dose inhalers. It stipulates the material and components, the packaging and labelling, and aerosol characterization as determined by in vitro testing. 1.2 This Standard does not address (a) pressurized metered-dose inhalers (pMDIs) and the medications that are delivered…

1. Scope 1.1 These provisions apply to the construction, materials, performance, and testing of NPS 1-1/4 in and smaller self-acting service-type regulators with internal relief valves or overpressure cut-off (OPCO)* devices, or both, utilized to control the pressure of gas delivered to a customer's piping at a delivery pressure of 5 to 9 in water column (1.24 to 2.24 kPa), for…

La présente Norme nationale du Canada est équivalent à la Norme internationale ISO/IEC 10181-6:1996 (premiére édition, 1996-09-15). 1 Domaine d'application La Recommandation / Norme internationale sur les Cadres de sécurité pour les systèmes ouverts couvre l'application des services de sécurité dans un environnement de systèmes ouverts où le terme «systèmes ouverts» est utilisé…

This International Standard specifies methods of calculating the theoretical quantity of outdoor air required in cargo spaces of ships where vehicles with internal combustion engines are driven, in order to dilute the polluted air to within the permitted occupational exposure limits. Annex A specifies average values of the amounts of pollutants in exhaust gases from vehicles with internal…

ISO 3864-1:2002 establishes the safety identification colours and design principles for safety signs to be used in workplaces and in public areas for the purpose of accident prevention, fire protection, health hazard information and emergency evacuation. It also establishes the basic principles to be applied when developing standards containing safety signs. ISO 3864-1:2002 is applicable to…

This Standard was developed in partnership with the Government of Ontario. This Standard is availiable in both regular and large-print format. 1. Scope 1.1 Objectives This Standard is for use by organizations that intend to provide people with disabilities with customer service that is equivalent to the quality of service provided to the population at large. The objectives of this…

This Recommendation | International Standard will define those TTP services needed to support the application of digital signatures for the purpose of non-repudiation of creation of documents. This Recommendation | International Standard will also define interfaces and protocols to enable interoperability between entities associated with these TTP services. Definitions of technical services and…

This Recommendation | International Standard will define those TTP services needed to support the application of digital signatures for the purpose of non-repudiation of creation of documents. This Recommendation | International Standard will also define interfaces and protocols to enable interoperability between entities associated with these TTP services. Definitions of technical services and…